Audiovox FP2000 User Manual - Page 16

Installation(continued) Notes about connection 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or color problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. Connecting the Video/Audio equipment You can connect the unit to a DVD or VCR to enjoy playback with high quality picture and sound. Please refer to the instruction manual of the equipment to be connected. Composite Video signal connection Connect the composite video signal terminal on the TV to the output of AV equipment through composite cable. If you select the video signal, please set the input signal source of LCD TV to AV mode. DC 12V VGA PC-AUDIO Y Pb Pr R AUDIO L PHONE VIDEO L AUDIO R VIDEO L AUDIO R S-VIDEO DTV IN RF AV OUT AV IN Y Yellow (video) w White (audio, L) R Red (audio, R) Y w R To S-VIDEO input To video input To audio inputs VCR, DVD etc. (NOT SUPPLIED) Y To video output w R To audio outputs To S-VIDEO output Note: Composite video is the most common used signal, but the picture quality is not as high as S-video. S-VIDEO Signal Connection Connect the S-video terminal on the TV to the output of AV equipment using a S-video cable. If you select S-video signal, please set the input signal source of LCD TV to SVIDEO mode. S-Video is a signal format which transfers the color and brightness of the picture with higher quality than a 16