Audiovox FPE3207DV Owners Manual - Page 13
Connecting A High-definition Hd Source, Connecting A Pc - dvd player
View all Audiovox FPE3207DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). To AUDIO IN jacks (YUV IN) HD SOURCE With component video output (Digital Cable Box*, Satellite Receiver*, or external over-the-air HD-Tuner). To AUDIO OUT jacks * May require a subscription for receiving HD channels. Check with your cable/ satellite service provider for details. COMPONENT VIDEO IN To COMPONENT VIDEO IN jacks (YUV IN) COMPONENT VIDEO OUT To COMPONENT VIDEO OUT jacks NOTE When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a maximum resolution of 1080i. CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and audio cable (not included) as shown. Make sure you connect the cable from the computer (PC Connector and AUDIO - PC OUT) to this unit (MONITOR / VGA and AUDIO - PC IN). E - 12 To AUDIO jack (PC OUT) To PC connector