Audiovox GMRS122-2CH Owners Manual - Page 14
VOX Selection Mode, Button Beep Key Tone, Call Ringer Selection Mode - radio
UPC - 044476011818
View all Audiovox GMRS122-2CH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
To enable and disable the Roger Beep tone: - From GMRS standby mode, press the MODE Button 4 times (in FRS mode, 3 times) until the flashing Roger Beep icon ( ) appears with On or oF. - Press the Up or Down Button to select the tone on or off as desired. - When enabled, the tone icon ( ) appears steady on the display. - Press the PTT button momentarily to confirm selection. VOX Selection Mode This option enables you to have hands-free conversation. When using the internal microphone/speaker or external microphone/headset (purchased separately), your voice or the signal is detected and the radio transmits and receives automatically. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT button. To set the radio for VOX operation: - From GMRS/FRS standby mode, press and hold the MODE button for 3 seconds, or until the VOX icon appears on the display. - To terminate VOX operation, press and hold the MODE button for at least 3 seconds; the VOX indication will disappear. Button Beep (Key Tone) This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Power On/Off/SCAN Button, Up/Down Buttons and MODE Button. This feature is always on. Call Ringer Selection Mode The transceiver provides a transmit call ring melody at the receiving unit to alert you to an incoming call. To activate the call ringer melody: - From GMRS/FRS standby mode, press the PTT button twice in quick succession; a call ring melody will sound at the receiving unit to alert the user to an incoming transmission, provided that unit is equipped with this capability and set to the same channel. 14