Audiovox GMRS7015RC Owners Manual - Page 10

GMRS7015RC OPERATIONAL MODES SCANNER BAND GMRS/FRS BAND MEMORY CHANNEL SELECT CHANNEL SELECT CTCSS SELECT NOTE: 1. To switch between GMRS/FRS and SCANNER mode, press and hold the MOSE/SCANNER button for 2 seconds. Refer to the appropriate section of this manual for detailed operating instructions for each mode. 2. To enter the VOX mode, press and hold the VOX button for 1 second. Controls: POWER SELECT (GMRS Channels Only) VOX LEVEL SELECT DUAL WATCH BUTTON BEEP ROGER BEEP CALL SELECT LED Flashlight Button (16) Press this button on the right side of the Transceiver to light the white LED (15) on top of the unit, thereby activating the built-in flashlight function. Power On-Off/SCAN Button (13) Press and hold the power on/off button ( s ) for 2 seconds. You will hear a dual beep to indicate the unit is on. Press the on/off button again for 2 seconds to turn the unit off. When the unit is on and the button is pressed momentarily, the scan mode is enabled or disabled; when enabled, the scan icon (SCAN) appears on the display. Adjusting the Volume (10, 11) With the unit powered on, press the Up Channel/Volume button ( ) to increase volume and the Down Channel/Volume button ( ) to decrease 128-7961 10 of 28 10