Audiovox HDP100 Quick Start Guide - Page 1

HD Powerlink Quickstart Guide Congratulations on your purchase of the AR HD Powerlink System, the HDP100. This guide takes you through the steps to get started. Getting Started The first thing to do is unpack, and check to make sure your kit has all of the following parts: a HDP100 Transmitter b HDP100 Receiver a c Two Stands d Four Bracket Screws e One Wall Mount Kit · Wall mount bracket · Two drywall screws · Two drywall anchors f One 3' HDMI Cable g IR Extender Kit h Eight Attachable Feet c b h e d g f Make sure your home entertainment components satisfy the HD Powerlink system requirements. You need a... • TV or monitor with HDMI input • Video source with HDMI output Test The Units Before installing the HDP100 transmitter and receiver, test them to make sure they're linked. A. Plug in both units in the same outlet (any working outlet). er a B. Turn both units on. The switches are on the back panels. C. Within moments, the LINK indicators on both the receiver and transmitter units glow steadily. The DATA indicators glow steadily, then start pulsing. The units are linked and ready to connect. · Note: If the LINK and DATA indicators do not illuminate (or if the LINK indicator starts flashing), consult the users guide for information on resetting the units. D. Turn both units off and unplug them. continues on back...