Audiovox JCCSPK Installation Instructions - Page 5

Wiring Connecting to a Built-in Center Channel Amplifier If your head unit has a built-in center channel amplifier, connect the positive (+) terminal from the head unit to the positive (+) terminal on the speaker (the striped wire). Connect the negative (-) terminal from the head unit to the negative (-) terminal on the speaker. JENSEN HEAD UNIT EXAMPLE NOTE: To prepare the wires for connection, strip approximately 3/8" of the insulation from each wire, exposing the bare conductors. Twist the end of each wire before connecting. NOTE: Speaker wire colors are for illustrative purposes only. Please refer to the owner's manual to determine the wiring colors for your radio. GREEN/BLACK(-) GREEN(+) REAR L WHITE/BLACK(-) WHITE(+) FRONT L BROWN/BLACK(-) BROWN(+) CENTER GREY/BLACK(-) GREY(+) FRONT R PURPLE/BLACK(-) PURPLE(+) REAR R PAGE 3