Audiovox SDST5V1 User Guide - Page 18
Step 2: Install the Vent or Dash Mount
![]() |
View all Audiovox SDST5V1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Vehicle Installation Step 2: Install the Vent or Dash Mount Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount. Installing the Dash Mount: CAUTION! The adhesive used on the Dash Mount may be difficult to remove. Do not install this mount on leather surfaces (contact your vehicle dealer if you are unsure about your dash surface), and make sure the air temperature is at least 60°F (15°C) during installation. If it's not at least 60°F, turn on the heater in your vehicle to bring the temperature up to 60°F. 1 Locate a flat surface for the Dash Mount. Make sure there is ample room for the PowerConnect Vehicle Dock and Starmate 5 when installed. 2 Set the orientation of the Dash I II Mount before adhering it. Loosen the knob and adjust the adhesive foot for the location you selected in "Step 1: Choose a Location for Your Radio" on page 16: • Option 1 & Option 3 should be oriented as I. • Option 2 should be oriented as II. 3 Attach the Dash Mount to the PowerConnect Vehicle Dock using the provided screws. 18
![](/manual_guide/products/audiovox-sdst5v1-user-guide-e9c8d1c/18.png)