Audiovox SDSV6V1 User Guide - Page 45
Power button, Signal, Select button - sirius radio
![]() |
View all Audiovox SDSV6V1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
4 Power on your Stratus 6 by pressing the Power button. 5 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the SIRIUS signal. There should at least be one bar on the upper right corner of the main display screen that denotes antenna jump signal strength. You can also press and hold menu and then press to scroll to and highlight Signal. Press the Select button. The Satellite and Terrestrial bars show the strength of the signal S i g n a l being received. If the signal SAT - + reception is good, press and hold menu to return to the main TER - + display screen. 6 Ensure that the Stratus 6 is tuned to channel 184. Upon power up, the Stratus 6 should tune to channel 184 by default, when it's not yet activated. If it's not on channel 184, refer to "Listening to Satellite Radio" on page 62 to learn about how to tune a channel. 7 If you haven't done so, turn on your vehicle's stereo system. Set it to play input from the cassette source. 8 You should hear SIRIUS channel 184 through your vehicle's stereo system. You are now ready to activate your Stratus 6. 9 The audio level output of the Stratus 6 can be increased or decreased as necessary to match the audio levels of other sources 45
![](/manual_guide/products/audiovox-sdsv6v1-user-guide-5286447/45.png)