Audiovox SIR-GM1 Installation Guide - Page 6

Installation It is recommended that prior to starting the installation, you thoroughly read this manual and follow the guidelines listed below: Do not install the tuner under the carpet or in a small enclosed area without proper ventilation. Doing so can result in damage to the tuner or the vehicle. Some installations may use the factory satellite radio tuner location. If you are using this location, please follow the factory instructions for installing the tuner in your vehicle. If you are not using this location, please read the following installation guidelines. Consider the mounting location carefully. You should make sure that you avoid the following: • Any location where the tuner is exposed to moisture. • Any location where the unit is exposed to extreme heat. • Any location that would interfere with moving parts on the vehicle or hamper driving. Mounting the SIR-GM1 Tuner Be sure that you find a location that is flat and has clearance above the unit to prevent any damage as well as allow for ventilation. Use the supplied screws to securely fasten the unit. Caution: If you are attaching the unit directly to the vehicle's chassis, be sure that you check to make sure the area behind the unit is free from moving parts, fuel or break lines, wire harnesses or any other items which may get damaged by drilling a mounting hole or using the supplied screws. Installing the Antenna The antenna includes a 6-1/2" cable cover/tail which covers the exposed antenna cable and keeps it attached securely to vehicle roof. The tail also helps position the antenna the proper distance from the window, sunroof or rear hatch. Antenna (Bottom) Adhesive Strips Cable Cover/Tail Connect the cable cover/ tail to the antenna cable, insert the cable through the grove. Peal off the adhesive tape Note that the SIR-GM1 is not compatible with the factory satellite radio antenna that might be installed in the vehicle. You must install a SIRIUS compatible antenna such as the one included with this product. 6 SIR-GM1 Installation Guide