Audiovox SIRPNP1 User Guide - Page 5

Introduction The Audiovox SIRIUS® Shuttle processes the satellite signals received by the externally mounted antenna (purchased separately as part of the Home or Vehicle Kits). The Shuttle recognizes and decodes the incoming SIRIUS® program information and provides an audio signal to your radio or other audio output equipment. NOTE: The SIRIUS® signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as nearby buildings, high terrain, parking garages or tunnels. The Shuttle is typically installed in an accessible location of the vehicle (dash area), consistent with line-of-sight operation of the remote control, and/or within easy reach of the driver. For home use, situate the Shuttle close to your stereo receiving equipment. 1. Set up your Audiovox Shuttle using the installa- tion instructions included in your Home Kit or Vehicle Kit, or with the help of a professional installer. NOTE: Refer to Antenna Aiming (page 18) during the installation procedure. 2. When power is available to the unit, note that the integral Power button LED icon lights red. Then press the Power button to turn on the Shuttle. 3. The Sirius logo ( ) appears on the display followed by the Sirius preview stream. If not go to stream 184 using the direct channel method, page 9. 4. To obtain the Sirius identification (ID) number, press and hold the MODE button for 2 seconds. The MENU OPTIONS page appears with the Sirius ID option highlighted. Press the Select ( ) Button and the 12 digit Sirius ID number will appear. Press the Select ( ) or Mode Button to exit the function. Write the Enjoying Your SIRIUS® Shuttle number here for future reference. You can begin to enjoy Sirius® Satellite Radio as soon as the Shuttle and Kit installation are complete: 5. Activate your Sirius® radio service ---- it's easy. You have one of two choices to activate your service: -5- 128-6812 5 of 24