Audiovox SIRPNP2 User Manual - Page 17

Upon entering this mode, rotating the Rotary Encoder knob to toggle between the FM ON or FM OFF function/display selection. To select and/or exit this function, press the Encoder knob (No button activity for 10 seconds will also exit this function.) NOTE: It is recommended that you turn the FM Transmitter off if you are using the low level audio outputs in your particular application. Add or Skip Upon entering this mode, a stream list is displayed with the current stream in play highlighted. Rotate the Encoder knob to navigate the list and highlight the stream to be adjusted. Once a stream has been highlighted, pressing the Select Button displays the text "Skip" next to the stream, and prevents the stream from being accessible during any of the tuning modes. Skipped streams can only be accessed either through direct stream number entry or by returning to this used to lock/unlock stream access. All future entries into this mode displays a stream list with the current stream in play highlighted. The Encoder knob is used to navigate the list and highlight the stream to be adjusted. Once a stream has been highlighted, pressing the Encoder knob displays the text "Lock" next to the stream and prevents the stream from being accessible during any of the tuning modes. Locked streams can be accessed only by direct stream number entry, at which time the user will be prompted to enter the previously stored 4-digit code. Once the correct code has been entered, the audio begins to play. The stream returns to the locked status if the stream is changed or the vehicle/unit is turned off (or by returning to this menu and going through the same process to return the stream to the list). Upon adding a stream, the text "Lock" is removed from alongside the stream number/name. menu and going through the same process to return the skipped stream to the list. Upon adding a stream, the text "Skip" is removed from alongside the stream number/ name. Lock/Unlock Default Code Function The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default Lock Options Upon entering this mode for the first time, the user is prompted to enter a four digit numerical code that is lock code is "0000". This code can be maintained or changed. To change the default lock code perform the following procedure: -17- 128-6901 17 of 28