Audiovox VM8012 Operation Manual - Page 10

VM8012 OPERATION Power Press the (power) button (2) to turn the unit on. Press and hold the power button again to turn the unit off. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. Source Press the SRC button (6) to select a different mode of operation, as indicated on the display panel. Available modes include tuner (FM1, FM2, FM3, AM1, AM2), DVD, SD, USB, and auxiliary (AUX). Audio Mute Press the MUTE button (21) to silence the audio volume. " " appears on the display. Press MUTE again to restore volume to the previous setting. Volume Control To increase the volume, turn the rotary encoder (5) clockwise. To decrease the volume, turn the rotary encoder counter-clockwise. When volume is adjusted, the volume level will be shown on the display panel as a number ranging from "0" (lowest) to "63" (highest). Audio Menu Press the MENU button (5) to access the audio menu. Press the MENU button repeatedly to move through the list of menu options. SRC DISP / 1 INT 2 RPT 3 20 21 RDM 4 5 6 LOC MUTE LOUD ST/MO AS BAND • BASS: Turn the rotary encoder (5) to adjust the bass level from "+7" to "-7". • TREBLE: Turn the rotary encoder to adjust the treble level from "+7" to "-7". • BALANCE: Turn the rotary encoder to adjust the balance from "R7" (full right) to "L7" (full left). • FADER: Turn the rotary encoder to adjust the fader from "F7" (full front) to "R7" (full rear). The unit automatically exits the audio control menu after five seconds of inactivity. Menu Operation Press and hold the MENU button (5) for more than two seconds to access the menu. Press the MENU button to move through the following menu options: EQ MODE, BEEP, 12/24 MODE (clock), VOL MODE, A-VOL, SUBWOOFER, SUB VOL. The following procedures assume you have already accessed the menu. Equalizer Selector (EQ MODE) The equalizer function applies preset sound effects to the unit's audio output signal. Turn the rotary encoder to select from the following equalizer options: "OFF", "ROCK", "POP", "CLASSIC" and "FLAT". With the equalizer function activated, if bass or treble is adjusted, the EQ Mode will revert to OFF. When the equalizer function is activated, the most recently selected bass/ treble levels cannot be adjusted. When the equalizer function is not active, the unit will return to the most recently selected bass and treble levels. 6