Audiovox VOH701 Operation Manual - Page 8

Wired FM Modulator (optional) Your video system may be equipped with an RF modulator, that allows you to listen to the VOH701's audio signal by tuning your vehicle's radio to the selected frequency, (88.7 or 89.1 - Check with your installer) and turning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver's side of the dash, check with your installer for the exact location.) Whenever the RF modulator is on, broadcast radio reception will be poor. Turning the remote mounted toggle switch off will allow normal radio reception. NOTE: Audiovox recommends the use of the Audiovox FMM100A FM Modulator. Audiovox Video Cassette Player (AV1) In most installations a VCP will be connected to the "AV1" input. To view a video cassette, turn the VOH701 On and press the source button on its control pad until the "AV1" is displayed on the screen. The VCP may also be operated with a remote or the buttons on its face. The VOH701 is now ready to play the audio and video signals from the VCP if it is connected to the "AV1" input. Press play on the VCP or on the remote control to view the tape. For more information see the operator's manual accompanying your VCP. AV2 / AUX The second video input may be connected to a DVD player, video game system, or other audio / video input. To play the AV2 or AUX source, turn the VOH701 on and press the source button on the pod until the "AV2" or "AUX" is displayed on the screen. Turn the source component on with its power button or remote control. The VOH701 is now ready to play the audio and video signals from the source connected to AV2 or AUX inputs. -8- 128-6883 8 of 12