Audiovox XMRVRFM002 User Guide - Page 13

13 Getting Started/CommanderMT Display Controller Features Online Activation Process - Once the ID code is obtained, log on to XM® at http://activate.xmradio.com and follow the easy instructions to activate your CommanderMT XM® unit. Call-in Activation Process - Call XM ® at 1-800-XM RADIO (1-800-967-2346). One of XM®'s friendly Customer Care representatives will take the necessary information and walk you through the activation process. After activation is completed, you should keep your receiver ON until the XM signal has been received and you have access to the full channel lineup. Activation normally takes 10 - 15 minutes, but during busy periods you may need to keep your radio on for up to 1 hour. This will complete the activation process. CommanderMT Display Controller Features The Audiovox CommanderMT Display Controller provides 8 control buttons, five of which are integrated with the scroll wheel, plus number buttons 0 through 9. (See Figure 5.) Power On/Off: When the Power( ) button on the Commander or Remote Control is pressed momentarily, power is applied to the XM® Mini-Tuner. The XM® logo appears and slowly fades on the display for 2 seconds, followed by appearance of the Audiovox logo ( ) for 10seconds. Power up is followed by the Preview screen or by the tuning mode in effect when the unit was last powered off. (See Figure 6.) Power is turned off when the Power button is momentarily pressed; the XM® logo appears and slowly fades on the display for 2 seconds, after which the unit enters the power off state.