Audiovox XR9 User Guide - Page 18

Lock Options Enter Code Lock Options Enter Code **** The current setting is indicated by number of bars in the graph. Moving the antenna location should maximize the number of bars in the respective graph, thus ensuring optimum reception. To exit this function, press the SELECT Button. Lock Options New Code Lock Options New Code **** NOTE: Terrestrial repeaters are typically used in large urban areas where structures may affect the line of sight satellite signal. Terrestrial signals may not be available in your geographic location. 6. Press the SELECT button. 7. Confirm the new code using buttons 0-9 and press the SELECT button. 8. The lock code is now changed. Channel Add/Skip Upon entering this mode, a channel list is displayed with the current channel in play highlighted. Use the Channel Up/Down buttons to navigate the list and highlight the channel to be adjusted. Channel Add/Skip Antenna Aiming (Home Installation) Upon entering this mode, two 7-segment vertical bar graphs are displayed representing terrestrial (tower) and satellite transmitters. The 4 The 40s 5 The 50s 6 The 60s 7 The 70s signal strength is displayed Antenna Aiming Channel Add/Skip by the respective graph 4 The 40s segments. Position the 5 The 50s antenna to optimize either the satellite or terrestrial signal. 6 The 60s 7 The 70s -18- Channel Add/Skip 4 The 40s 5 The 50s 6 The 60s 7 The 70s 128-7220A 18 of 32