Audiovox gx2400 Owners Manual - Page 11

GX2400 English I/B ver. 09020A-1 9VDC Adapter Jack Plug AC Outlet 9VDC Adapter (Figure 9) HANDSET BATTERY INSTALLATION CAUTION: Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. 1. Remove the battery compartment cover of the handset. 2. Connect the rechargeable Ni-Cd battery as shown on Figure 10. Handset Battery Compartment Insert the End of the Battery Pack Wire RED Wire BLACK Wire (Figure 10) 3. Insert the Ni-Cd battery into the battery compartment of the handset. 4. Slide the battery compartment cover firmly in its closed position. INITIAL SETUP Before you can use your cordless telephone, the handset must be charged for at least 14 hours. See charging instruction in the MAXIMIZING BATTERY LIFE section of this manual. TONE / PULSE SETTING Select the appropriate dialing service by moving the T / P (Tone / Pulse) switch on the bottom of the base unit: • (T) TONE for Tone service, or • (P) PULSE for Rotary service. RINGER ON / OFF SETTING 09020A-1 T / P (Figure 11) 10 OWNER'S MANUAL#GX2400VER.09020A-1 PAGE: 10 U.S. English Version