Avanti CK3016 Instruction Manual - Page 7

INSTALLATION INSTRUCTIONS  Before Using Your Compact kitchen • Remove the exterior and interior packing. • Check to be sure you have all of the following parts: Kitchen Section • 1 Wire Shelf • Strainer • Strainer Plug • Backsplash and Assembly Screws • Instruction Manual Refrigerator Section • 2 wire shelves • Instruction Manual • Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system of the refrigerator from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth.  Energy Saving Tips • The Compact kitchen should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.  Installation of Your Compact Kitchen Figure No. 1 NOTE: 1. In order to remove shelves of refrigerator, a clearance A of 10 inches is required. When built-in, no clearance is required on either side. 2. B = 30 inches minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet. 7