Avanti CTW10V0W Instruction Manual - Page 8
Installation Instructions
View all Avanti CTW10V0W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INSTALLATION INSTRUCTIONS BEFORE USING YOUR PORTABLE WASHER · Remove the exterior and interior packing. · You will need the following tools: · Wrench · Pliers · Screwdriver · Check to be sure you have all of the following parts: · 1 Inlet Hose · 1 Faucet Adapter · 1 Noise Proof Plate With 2 Screws · 1 Drain Hose Assembly SCREWDRIVER WRENCH PLIERS · Remove shipping brace. Note - It should be saved and used (to prevent damage to washer components) whenever washer is moved or transported to a new location. · Clean the interior surface with lukewarm water using a soft cloth. · Allow 2 inches of space between the back and sides of the appliance. · Put your laundry into the washer evenly. Uneven laundry may cause noise or vibration. · DO NOT use excessively hot water (122ºF / 50°C or more). Plastic parts may be deformed or damaged. Also, clothing may be deformed or bleached. · Before washing, check all pockets. If nails or pins remain in pockets, they may damage the washer or clothes. · Never splash water on the control panel. · Plug the washer into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an Authorized Avanti Products service center. SELECTING A LOCATION Before you install the portable washer, select a location with the following characteristics: · A hard level surface (if the surface is uneven, see Adjusting The Adjustable Foot section on the next page). · Away from direct sunlight. Direct sunlight may affect the acrylic coating, plastic and electrical components. · Adequate ventilation. · Away from sources of heat such as coal or gas. Make sure that the washing machine does not stand on its power cord. · Ventilation openings must not be obstructed by carpeting when the portable washer is installed on a carpeted floor. It is recommended that you place your portable washer on a hard material floor such as tile, concrete, linoleum and to avoid if at all possible placement on wooden floors or carpeted areas. 8