Avanti DW18D3SE Instruction Manual - Page 7

CONTROL PANEL 7 1 2 1 Program Indicator Lights 2 Rinse Aid Low Indicator Light 3 Power Indicator Light 4 Power ON / OFF Button 5 Start / Reset Button 6 Program Selector Button 6 5 7 Air Vent Program Indicator light next to the selected program will turn on while the cycle is 1 running. During the wash cycle the indicator light for the selected program will blink intermittently. 2 Rinse Aid Warning Light will turn on when the dispenser needs to be refilled. 3 Power Indicator light will turn on when the Power ON/OFF button is pressed. 4 ON/OFF Button: Press to turn the unit ON/OFF 5 Start / Pause Button: Press to start the wash cycle, press again while the unit is in operation to pause the wash cycle. 6 Program Selector Button: Press the button to select the appropriate wash cycle for your needs. Once the program has been selected the appropriate indicator light will flash/blink intermittently Pre-Programmed Wash Cycles Program Cycle Selection Information Heavy For the heaviest soiled loads, such as pots, pans, casserole dishes and dishes that have been sitting with dried food on them for a while Normal (AHAM) For normally soiled loads , such as pots, plates,glasses and lightly soiled pans. standard daily cycle. Description Detergent Running of Cycle pre/main time(min) Pre-wash Pre-wash(122°F) Wash (127°F) Rinse Rinse (144°F) 18g 125 Drying Pre-wash Wash (122°F) Rinse Rinse (131°F) Drying 18g 115 Energy (Kwh) 0.51 0.594 Pre-wash For lightly soiled loads,such Wash (122 °F) asplates,glasses,bowls and Rinse 18g 85 0.291 Light. lightly soiled pans. Rinse (131°F) Drying Speed A shorter wash for lightly soiled loads that do not need drying. Pre-wash Wash (122°F) Rinse(131°F) Drying 15g 65 0.29 Water Rinse (gal) Aid 4.41 3.09 3.54 2.7 7