Avanti DW6W Instruction Manual - Page 20

Improper loading, The dishes are not dry

Get Avanti DW6W PDF manuals and user guides View all Avanti DW6W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

The dishes are not clean. The dishes were not loaded correctly The program selected was not the appropriate cycle for the condition of the dishes. Not enough detergent was dispensed. Items were blocking the rotation path of the water spray arm. The filter assembly in the base of the unit is not clean, is clogged, or is not installed correctly. (This may cause the spray arm jets to become clogged). See the notes in Loading the Dishwasher section of this manual. Select a more intense program. Use more detergent, or change the type of detergent being used. Rearrange the items accordingly so that the spray arm can rotate freely. Clean and / or fit the filter assembly correctly. Clean the spray arm jets. See the Cleaning the Spray Arm section of this manual. Cloudiness on the glassware. Black or gray marks on dishes. Detergent left in the dispenser cups. The dishes are not dry This is a combination of soft water and too much detergent. Aluminum utensils have rubbed against the dishes. Dishes blocked the detergent cups not allowing them to open completely during the wash cycle. Improper loading Too little rinse-aid Dishes were removed from the washer too soon. Wrong program / cycle selected. Using cutlery with a low quality coating. Use less detergent if you have soft water and select a shorter cycle to wash the glassware to get them clean. Use a mild abrasive cleaner to remove the marks Re-load the dishes accordingly and re-run the wash cycle. Load the dishwasher as suggested in the Loading your dishwasher section of this manual. Increase the amount of rinse-aid dispensed or refill the rinse-aid dispenser if empty. Do not empty your dishwasher immediately after the cycle ends. Open the door slightly so that the steam can escape. Begin unloading the dishwasher once the dishes are barely warm to the touch. When using the shorter cycles/programs the washing temperatures are lower. This also lowers the cleaning performance. Choose a cycle / program with a longer wash time. Water drainage is more difficult with these items . Cutlery or dishes of this type are not suitable for dishwasher use. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
20
The dishes are not
clean.
The dishes were not loaded
correctly
See the notes in Loading the Dishwasher
section of this manual.
The program selected was not the
appropriate cycle for the condition
of the dishes.
Select a more intense program.
Not enough detergent was
dispensed.
Use more detergent, or change the type of
detergent being used.
Items were blocking the rotation
path of the water spray arm.
Rearrange the items accordingly so that
the spray arm can rotate freely.
The filter assembly in the base of
the unit is not clean, is clogged, or
is not installed correctly.
(This may cause the spray arm
jets to become clogged).
Clean and / or fit the filter assembly
correctly.
Clean the spray arm jets.
See the
Cleaning the Spray Arm section of this
manual.
Cloudiness on the
glassware.
This is a combination of soft water
and too much detergent.
Use less detergent if you have soft water
and select a shorter cycle to wash the
glassware to get them clean.
Black or gray marks on
dishes.
Aluminum utensils have rubbed
against the dishes.
Use a mild abrasive cleaner to remove the
marks
Detergent left in the
dispenser cups.
Dishes blocked the detergent
cups not allowing them to open
completely during the wash cycle.
Re-load the dishes accordingly and re-run
the wash cycle.
The dishes are not dry
Improper loading
Load the dishwasher as suggested in the
Loading your dishwasher section of this
manual.
Too little rinse-aid
Increase the amount of rinse-aid
dispensed or refill the rinse-aid dispenser
if empty.
Dishes were removed from the
washer too soon.
Do not empty your dishwasher
immediately after the cycle ends.
Open
the door slightly so that the steam can
escape.
Begin unloading the dishwasher
once the dishes are barely warm to the
touch.
Wrong program / cycle selected.
When using the shorter cycles/programs
the washing temperatures are lower.
This also lowers the cleaning
performance.
Choose a cycle / program with a longer
wash time.
Using cutlery with a low quality
coating.
Water drainage is more difficult with these
items .
Cutlery or dishes of this type are
not suitable for dishwasher use.