Avanti EWC18N2PD Instruction Manual - Page 10

OPERATING YOUR WINE CHILLER It is recommended you install the Wine Chiller in a place where the ambient temperature is between 23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 8º-18ºC/46º-64ºF may not be reached. The default temperature set at the factory is 12ºC / 54ºF. Recommended Temperatures for Chilling Wine. Red Wines Dry/White Wines Rose Wines Sparkling Wines 14º - 18º C 9º - 14º C 10º - 11º C 8º - 9º C 57- 64º F 49 - 58º F 51 - 53º F 46 - 49º F Temperature Ranges For Your Wine Chiller Upper Zone Lower Zone 8 º - 18º C 46 º - 64º F 12 º - 18º C 54 º - 64º F  CONTROL PANEL You can select temperature display setting from Fahrenheit to Celsius degree by pushing this button approximately for 3 seconds. The degrees will appear in blue color in the temperature display window.  SETTING THE TEMPERATURE CONTROL  Upper zone and bottom zone are each controlled separately  Your Wine Cellar has been equipped with an "automatic" control panel lock, that will activate 12 seconds after the last time a button has been touched. Push the and button simultaneously for 3 seconds to unlock the control panel. You will hear a "BEEP" sound to alert you that the control is now active.  You can set the temperature as you desire by pushing the button on the control panel for each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push the button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the button once. 10