Avanti FF116D0W Instruction Manual - Page 11

 Moving Your Appliance,  Energy Saving Tips,  Replacing Your Light Bulb

Get Avanti FF116D0W PDF manuals and user guides View all Avanti FF116D0W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

 Power Failure Most power failures are corrected within a few hours and should not affect the temperature of your refrigerator-freezer if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food.  Vacation Time Short vacations: Leave the unit operating during vacations of less than three weeks. Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary  Moving Your Appliance • Remove all the food. • Securely tape down all loose items inside your unit. • Turn the leveling screws up to the base to avoid damage. • Tape the door shut. • Be sure the unit stays in the upright position during transportation.  Energy Saving Tips • The unit should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of direct sunlight. • Let hot foods cool to room temperature before placing them in the unit. Overloading the unit forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil. • Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on frost build-up inside the freezer. • Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.  Replacing Your Light Bulb NOTE: All parts removed must be saved to do the replacement of the light bulb. Before removing the light bulb, either turn off the appliance or disconnect the electricity leading into the appliance at the main power supply. Failure to do so could result in electrical shock or personal injury. • Unplug the AC power cord from the wall. • Pull down to remove the lamp cover. • Unscrew the bulb. • Replace with a 15-watt bulb that is the same shape and size. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
refrigerator-freezer if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your food.
Vacation Time
Short vacations:
Leave the unit operating during vacations of less than three weeks.
Long vacations:
If the appliance will not be used for several months, remove all food and unplug the
power cord.
Clean and dry the interior thoroughly.
To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary
Moving Your Appliance
•
Remove all the food.
•
Securely tape down all loose items inside your unit.
•
Turn the leveling screws up to the base to avoid damage.
•
Tape the door shut.
•
Be sure the unit stays in the upright position during transportation.
Energy Saving Tips
•
The unit should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of direct sunlight.
•
Let hot foods cool to room temperature before placing them in the unit.
Overloading the unit forces
the compressor to run longer.
Foods that freeze too slowly may lose quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit.
This cuts
down on frost build-up inside the freezer.
•
Organize and label food to reduce door openings and extended searches.
Remove as many items
as needed at one time, and close the door as soon as possible.
Replacing Your Light Bulb
NOTE:
All parts removed must be saved to do the replacement of the light bulb.
Before removing the light bulb, either turn off the appliance or disconnect the electricity leading into
the appliance at the main power supply. Failure to do so could result in electrical shock or personal
injury.
•
Unplug the AC power cord from the wall.
•
Pull down to remove the lamp cover.
•
Unscrew the bulb.
•
Replace with a 15-watt bulb that is the same shape and size.
11