Avanti MCDW24SI Install Manual - Page 15
Adjusting The Movable Toe Kick Model Depending
View all Avanti MCDW24SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ADJUSTING THE MOVABLE TOE KICK (MODEL DEPENDING) Now that you have successfully installed the dishwasher, you need to attach the toe kick to the dishwasher. The two-piece toe kick can be adjusted to the height and depth needed for your kitchen. 1. p t A. If the height is 33 7/8" to 35 7/8"(860mm-910mm) and use short supports; adjustable plinth metal with 80 mm length (v), toe kick brackets(o) are installed. Mounting is done using Screws Ø 5/32" x 7/32" (Ø 4mm x 6mm) with a Philips Screwdriver. B. A. If the height is above 35 7/8" (910mm) and use short supports; adjustable plinth metal with 130 mm length (v), toe kick brackets(o) are installed. Mounting is done using Screws Ø 5/32" x 7/32" (Ø 4mm x 6mm) with a Philips Screwdriver. 2. The adjustable plinth number is determined according to the required distance and assembled to each other. 3. As shown in the Figure, the cylindrical feet of the adjustable plinth are attached to the plinth fixing metal parts and shifted through the cavity of the part. 860 870x1 880x2 890x3 900x4 910x5/6 r s 860 870x1 880x2 890x3 900x4 910x5/6 s 3. Depending on the desired depth, plinth locking(y) is attached to the toe kick bracket(o). 4. In order to place the plinth into the y machine, the loose edges shall be pressed firmly towards each other. 5. Finally, Toe kick brackets(o) are attached to the gaps under the machine and the installation is completed. 15