Avanti MO7192TB Instruction Manual - Page 12
A. One-stage Cooking, B. Multi-stage Cooking
View all Avanti MO7192TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SETTING A COOKING PROGRAM A. One-stage Cooking 1. Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds. 2. If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level. You can set the power level from 1 to 9. Use single digits to set a cooking power level: Number pad 9 8 7 6 5 4 3 2 1 Cooking power 90% 80% 70% 60% 50% 40% 30% 20% 10% B. Multi-stage Cooking You can program oven for 4 cooking stages. Each stage can be programmed with a different power level and time. To program 2-stage, 3-stage or 4stage cooking, repeat the one-stage cooking steps 1 and 2 and touch START. The oven will automatically proceed to the end of cooking stages. NOTE: After stage 1 time has elapsed, one beep sound, signaling the beginning of stage 2. After total time has elapsed, 4 beeps sound and END appears in display. Touch RESET pad or open oven door to clear END before starting another cooking function. 3. Touch START/STOP to start cooking. SPEED DEFROST 1. Touch SPEED DEFROST. 2. Enter desired defrosting time by touching correct number pads. Digital timer sets minutes and seconds from left to right so a single digit can be set (5 for 5 seconds ) or up to 4 digits (2405 for 24 minutes 5 seconds). 3. Touch START/STOP. NOTE: After time has elapsed four signals sound and END appears in display. Touch RESET pad or open door to clear END before starting another cooking function. DEFROST BY WEIGHT 1. Touch DEFROST BY WEIGHT pad. 2. Enter weight. 3. Touch START/STOP pad. Note: Weight must be in pounds and ounces. Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the fraction of a pound to ounces using the following chart (See page 19). 12