Avanti TLW21PS Instruction Manual - Page 13

OPERATING YOUR PORTABLE WASHER PREPARATION 1. Connect the water inlet hose 3. Insert the plug into the to the water faucet. Don't socket. For safety the plug switch on the power if the should have ground water pressure is lower than connection. 0.05MPa and higher than 0.5MPa. 4. Insert the end of drain hose into the hook shelf, and hang the drain hose over a drain outlet. 2. Ensure the drain hose has been installed properly. 5. Open the water faucet. 6. Put the wash load into the tub evenly. 7. Add the suitable quantity 8. Close the lid. Otherwise the detergent into the detergent washer will not wash or spin, case. and alarm will sound. BEFORE WASHING Prepare the wash load. Mix large and small articles in a load to get the best washing results. Drop articles loosely into the inner tub. Do not pack articles in or wrap them. Articles should move freely through the wash water for best cleaning results. Articles should rollover, sink and then reappear. When washing very large articles, do not fill inner tub as full as with other loads. The water level in your washer should fit the size of your wash load. Small load will use lower water levels. There must be enough water in the inner tub to allow articles to move and turn over freely. Overloading the inner tub can result in poor washing and rinsing. Overloading may also cause wrinkling and tearing of articles. WATER LEVEL Right Wrong 13