Avanti TLW30W Instruction Manual - Page 16

SPIN ONLY (Approximately 10 minutes). xPress down the power button. xPress the cycle button to select the SPIN function until only SPIN indicator is ON. xPress the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course. AUTOMATIC WASH PROGRAMS Water Level Wash Program Selection Range Default Wash Time (Min / Sec) Rinse Time ( Minutes ) Spin Time ( Minutes ) Total Time (Full Cycle) ( Minutes ) Heavy Quick 1 - 6 1 - 3 4 12 Min 3 2 Min 30 Sec 2 5 48 1 30 Sec 14 Wash 4Min Normal 1 - 6 4 +Soak 13Min 1 7 43 Jeans 1 - 6 Wash 3Min 4 40 Sec +Soak 2 13 Min 1 Min 10 Sec 45 Anti-wrinkle 1 - 6 4 12Min 2 00 37 Air dry 1 - 6 4 0 Min 0 56 60 NOTE: All automatic wash programs include soak time. To select one of the pre-programmed automatic wash cycles follow the instructions as shown below: xPress the power button. xPress the program button to select the appropriate program until the indicator light is ON. (NORMAL is the default program) xPress the water temp button to select the water temperature. (The default setting is cold water). xPress the water level button to select the appropriate water level setting.(The default water level is 4 water level) xPress the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course. Close the lid, or the washing machine will buzz during wash and spin cycle. In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the washing machine to automatically refill with water to adjust the imbalance. Note: xClothes easily discolored should be washed separately so as to prev ent inter-dyeing. xIf you want to change a selected program, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on, then press the Program button to select the new cycle before pushing START/PAUSE button. xWhen the Rinse and Spin functions are ON, do not use detergent. xIf you want to drain the water during washing, press thePOWER button first to turn the unit off, then press the POWER button again to turn the unit back on,then select the SPIN function. Press START/PAUSE button again to restart. 16