Avanti ZJ007-IS Instruction Manual - Page 9
Filling The Jug With Tap Water
![]() |
View all Avanti ZJ007-IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
FILLING THE JUG WITH TAP WATER 1. Remove lid. 2. Slowly fill the upper reservoir with cold tap water. Be careful not to dump water too quickly into the upper chamber when the lower chamber is empty as it may tip and spill. 3. Allow water to pass from the upper chamber through the filters into the lower chamber. Water will be ready to drink in several minutes. 4. Test the water using the TDS meter to confirm a "000" reading. If the meter doesn't read "000", empty all the water from the unit, check all connections and seal, then repeat steps 2 and 3. 5. Do not over fill. The first time you fill your Filter Jug it will take extra water to fill the cooler reservoir. When water in the lower chamber reaches the line marked "MAXIMUM WATER LEVEL", do not put any more water in the upper chamber, as it may leak. The upper chamber is not designed to be a storage reservoir. 7
![](/manual_guide/products/avanti-zj007is-instruction-manual-f34e22d/9.png)