Axis Communications 214 PTZ 214 Caméra réseau PTZ - Guide d' - Page 10

Accessing the AXIS 214 from the Internet, Further information, AXIS 214 Installation Guide - network camera

Get Axis Communications 214 PTZ PDF manuals and user guides View all Axis Communications 214 PTZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Page 10 AXIS 214 Installation Guide Accessing the AXIS 214 from the Internet Once installed, your PTZ network camera is accessible on your local network (LAN). To access the PTZ network camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, please visit the Axis Support Web at www.axis.com/techsup Resetting to the factory default settings This will reset all parameters, including the IP address, to the Factory Default settings: 1. Disconnect power from the camera. 2. Press and hold the Reset button (on the underside of the camera) and reconnect power. 3. Keep the button pressed for 15 seconds, and then release it. 4. Re-install the camera using one of the methods described in this document. Further information For further information, please see the AXIS 214 User's Manual, which is available on the CD included in this package. Updated versions can be obtained from www.axis.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Page 10
AXIS 214 Installation Guide
Accessing the AXIS 214 from the Internet
Once installed, your PTZ network camera is accessible on your local network (LAN). To access
the PTZ network camera from the Internet, network routers must be configured to allow
incoming traffic, which is usually done on a specific port. Please refer to the documentation
for your router for further instructions.
For more information on this and other topics, please visit the Axis Support Web at
www.axis.com/techsup
Resetting to the factory default settings
This will reset all parameters, including the IP address, to the Factory Default settings:
1.
Disconnect power from the camera.
2.
Press and hold the Reset button (on the underside of the camera) and reconnect power.
3.
Keep the button pressed for 15 seconds, and then release it.
4.
Re-install the camera using one of the methods described in this document.
Further information
For further information, please see the AXIS 214 User°s Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com