Axis Communications F1035-E F Series - Page 3
Dimensions - Main units - axis
View all Axis Communications F1035-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Technical Specifications - AXIS F Main Units Models AXIS F41: 1 channel, HDTV 1080p, WDR - Forensic Capture AXIS F44: 4 channels, 1080p/HDTV 720p, quad view (Main and sensor units sold separately) Video Video compression H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles Motion JPEG Resolutions 1920x1080 (1080p) to 160x90 AXIS F41: 1920x1200 (WUXGA) Frame rate AXIS F41: H.264/Motion JPEG: In 1080p (no WDR), 50/60 fps (50/60 Hz); In WUXGA (no WDR) and in 1080p with WDR, 25/30 fps (50/60 Hz) AXIS F44: H.264/Motion JPEG: In 1080p, 12.5/15 fps (50/60 Hz); In 720p, 25/30 fps (50/60 Hz) Video streaming Multiple, individually configurable streams in H.264 (Main, Baseline and High Profiles) and Motion JPEG; Controllable frame rate and bandwidth; VBR/MBR H.264 AXIS F44: quad view, max. 1080p resolution; 25/30 fps (50/60 Hz) with 720p capture mode; 12.5/15 fps (50/60 Hz) with 1080p capture mode Image settings Compression, Color, Brightness, Sharpness, Contrast, White balance, Exposure value, Exposure control, Exposure zones, Local contrast, Rotation, Corridor Format, Text and image overlay, Privacy mask, Mirroring of images AXIS F41: Wide Dynamic Range - Forensic Capture: up to 120 dB depending on scene Audio Audio streaming Two-way Audio compression AAC-LC 8/16 kHz, 8-64 kbit/s; G.711 PCM 8 kHz 64 kbit/s; G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s; Configurable bit rate AXIS F41: AAC-LC 8/16/32 kHz, 8-128 kbit/s Audio input/output External microphone input or line input, Line output Network Security Supported protocols Password protection, IP address filtering, HTTPSa encryption, IEEE 802.1Xa network access control, Digest authentication, User access log, Centralized certificate management IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH System integration Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform, specifications at www.axis.com; AXIS Video Hosting System (AVHS) with One-Click Camera Connection; ONVIF Profile S Intelligent video Video motion detection, Active tampering alarm, Audio detection, AXIS Camera Application Platform Event triggers Intelligent video, External inputs, Edge storage events Event actions File upload: FTP, HTTP, network share and email; Notification: email, HTTP and TCP; External output activation; Pre- and post-alarm video buffering; Video and audio recording to edge storage; Play audio clip AXIS F41: WDR mode Built-in installation aids Data streaming General Casing Memory Power Connectors Edge storage Operating conditions Approvals Dimensions Weight Included accessories Optional accessories Video management software Warranty Pixel counter Event data Aluminum AXIS F41: 512 MB RAM, 256 MB Flash AXIS F44: 1024 MB RAM, 256 MB Flash AXIS F41: Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3 (max 7.7 W); 8-28 V DC max 7.8 W AXIS F44: PoE IEEE 802.3af/802.3at Type 1 Class 3 (max 12.95 W); 8-28 V DC max 13.33 W Female RJ45 for 10BASE-T/100BASE-TX PoE; RJ12 for the sensor units; 6-pin terminal block for four configurable inputs/outputs (12 V DC output), max. load 50 mA; 3.5 mm mic/line in, 3.5 mm line out; 5-pin terminal block RS232; 2-pin terminal block for 8-28 V DC input Support for recording to dedicated network-attached storage AXIS F41: One SD/SDHC/SDXC slot supporting memory card up to 64 GB (card not included) AXIS F44: Two SD/SDHC/SDXC slots supporting memory card up to 64 GB (card not included) -30 °C to 60 °C (-22 °F to 140 °F) Humidity 10-85% RH (non-condensing) ECE R10 rev.04, EN 50121-4, EN 50155 (vibration, shock, bump), EN 50581, IEC/EN/UL 60950-1, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-60, IEC 60068-2-78, IEC 60529 IP4X, IEC 60721-3-5 5M3 (vibration, shock), IEC 62236-4, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2 AXIS F41: EN 55022 Class B, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24 AXIS F44: EN 55022 Class A, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, C-tick AS/NZS CISPR 22 Class A, KCC KN22 Class A, KN24 51 x 121 x 121 mm (2 x 4.8 x 4.8 in) AXIS F41: 532 g (1.17 lb); AXIS F44: 542 g (1.19 lb) Installation Guide, Installation and Management Software CD, Windows decoder 1-user license, AVHS Authentication key AXIS F8001 Surface Mount with Strain Relief, AXIS F8002 DIN Rail Clip, AXIS T8120 15 W Midspan 1-port, AXIS T83 Microphones AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis' Application Development Partners (not included) Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty a. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by Eric Young ([email protected]). Dimensions - Main units 1. SD card slot 2. Camera connector 3. Audio in and out 4. I/O terminal connectors 5. RS232 6. Power connector 7. Network connector 121 mm (4.8 in) 121 mm (4.8 in) A AXIS F14 2 3 45 51 mm (2 in) 1 B AXIS F44 1 67 2 3 45 7 6 51 mm (2 in)