Axis Communications P7214 P7214 Video Encoder - User Manual - Page 47
System Options, Ports & Devices, Maintenance
View all Axis Communications P7214 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
AXIS P7214 Video Encoder System Options Network Share Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings. To add a network share: 1. Go to System Options > Storage. 2. Click Network Share. 3. Enter the IP address, DNS or Bonjour name to the host server in the Host field. 4. Enter the name of the share in the Share field. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password. 6. Click Connect. To clear all recordings and data from the Axis product's folder on the designated share, click Clear under Storage Tools. To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks. To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings. Ports & Devices I/O Ports The Axis product provides four configurable input and output ports for connection of external devices. For information about how to connect external devices, see Connectors, on page 58. The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit. COM Port The Axis product has one RS-485/RS-422 serial port. The port supports the following modes: • Generic HTTP allows the Axis product to receive data and send commands via HTTP. • Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See Installing a PTZ driver for more information. Drivers can be downloaded from www.axis.com • Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy chain clients to communicate with the Axis product. Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settings see the online help . Port Status The list on the System Options > Ports & Devices > Port Status page shows the status of the product's input and output ports. Maintenance The Axis product provides several maintenance functions. These are available under System Options > Maintenance. Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. 47