Axis Communications Q1602 Q1602/Q1604 - Installation Guide - Page 12
AXIS Q1602/Q1604 Network Camera Installation Guide, Live View, Setup
View all Axis Communications Q1602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Page 12 AXIS Q1602/Q1604 Network Camera Installation Guide 5. Enter the password as set above, and click OK. If the password is lost, the camera must be reset to the factory default settings. See page 19. 6. AXIS Q1604: Capture mode is set the first time the product is accessed. Select the desired capture mode and click OK. Select the capture mode with the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product and click OK. When using 50 Hz, the maximum frame rate is limited to 25 fps. Note: Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of the world use 50 Hz. Local variations may apply; always check with the local authorities. 7. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this. Note: To install AMC in Windows Vista, you must run Internet Explorer as administrator. Right-click the Internet Explorer icon and select Run as administrator. 8. The Live View page of the network camera is displayed; the Setup link leads to menus that allow you to customize the camera. Setup - Provides all the tools for configuring the camera to requirements. Help - Displays online help on all aspects of using the camera.