Behringer 140 DUAL ENVELOPE/LFO Quick Start Guide - Page 2

Installation, Specifications - system 100

Page 2 highlights

Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Specifications Inputs Ext gate Impedance Min input level Max input level Frequency CV input Impedance Max input level CV scaling Ext LFO trigger Impedance Max input level Outputs Envelope 1/2 out Impedance Max output level LFO output Impedance Max output level Controls Attack Decay Sustain Release Manual gate switch Frequency range switch 3.5 mm jack, DC coupled 50 kΩ +3 V +10 V 3.5 mm jack, DC coupled 100 kΩ +/-10 V 1 V / octave 3.5 mm jack, DC coupled 50 kΩ +10 V 3.5 mm jack, DC coupled 1 kΩ +/-10 V 3.5 mm jack, DC coupled 1 kΩ 10 V pk-pk 1.5 ms - 7.5 s 4 ms - 15 s +/-10 V 4 ms - 15 s Envelope cycle start LFO low 0.05 - 1.8 Hz, mid 0.2 - 9 Hz, high 0.5 - 30 Hz Frequency Delay Waveform rotary switch Output level switch Power Power supply Current draw Physical Dimensions Rack units Weight LFO frequency, 0.05 Hz - 30 Hz LFO operation delay, 0 - 7 s Sine, triangle, pulse, sawtooth, rev sawtooth 1 V pk-pk, 10 V pk-pk Eurorack 40 mA (+12 V), 40 mA (-12 V) 44 x 81 x 129 mm (1.7 x 3.2 x 5.1") 16 HP 0.18 kg (0.4 lbs) LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty. Zhongshan Eurotec Electronics Limited No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China

  • 1
  • 2

Installation
The necessary screws are included with the module for mounting
in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes
spaced 2 HP apart along the length of the case, or a track that
allows individual threaded plates to slide along the length
of the case. The free-moving threaded plates allow precise
positioning of the module, but each plate should be positioned in
the approximate relation to the mounting holes in your module
before attaching the screws.
Hold the module against the Eurorack rails so that each of the
mounting holes are aligned with a threaded rail or threaded
plate. Attach the screws part way to start, which will allow
small adjustments to the positioning while you get them all
aligned. After the final position has been established, tighten the
screws down.
Specifications
Inputs
Ext gate
3.5 mm jack, DC coupled
Impedance
50 kΩ
Min input level
+3 V
Max input level
+10 V
Frequency CV input
3.5 mm jack, DC coupled
Impedance
100 kΩ
Max input level
+/-10 V
CV scaling
1 V / octave
Ext LFO trigger
3.5 mm jack, DC coupled
Impedance
50 kΩ
Max input level
+10 V
Outputs
Envelope 1/2 out
3.5 mm jack, DC coupled
Impedance
1 kΩ
Max output level
+/-10 V
LFO output
3.5 mm jack, DC coupled
Impedance
1 kΩ
Max output level
10 V pk-pk
Controls
Attack
1.5 ms - 7.5 s
Decay
4 ms - 15 s
Sustain
+/-10 V
Release
4 ms - 15 s
Manual gate switch
Envelope cycle start
Frequency range switch
LFO low 0.05 - 1.8 Hz,
mid 0.2 - 9 Hz,
high 0.5 - 30 Hz
Frequency
LFO frequency,
0.05 Hz - 30 Hz
Delay
LFO operation delay, 0 - 7 s
Waveform rotary switch
Sine, triangle, pulse,
sawtooth, rev sawtooth
Output level switch
1 V pk-pk, 10 V pk-pk
Power
Power supply
Eurorack
Current draw
40 mA (+12 V),
40 mA (-12 V)
Physical
Dimensions
44 x 81 x 129 mm
(1.7 x 3.2 x 5.1")
Rack units
16 HP
Weight
0.18 kg (0.4 lbs)
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone
and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park,
Nanlang Town, 528451, Zhongshan City, Guangdong Province, China