Behringer 995 ATTENUATORS Quick Start Guide - Page 1
Behringer 995 ATTENUATORS Manual
View all Behringer 995 ATTENUATORS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Start Guide 995 ATTENUATORS Specifications Legendary Analog Attenuator Module for Eurorack Controls Signal Input Type Impedance Maximum input level Signal Output Type Impedance Maximum output level Controls Attenuators Physical Dimensions Rack units Weight 3.5 mm jack, half normalled, DC coupled < 25 kΩ, unbalanced +20 dBu 3.5 mm jack, DC coupled < 25 kΩ, unbalanced +20 dBu -∞ to unity gain, passive 35 x 40 x 129 mm (1.4 x 1.6 x 5.1") 8 HP 0.08 kg (0.18 lbs) Attenuator knobs - Adjust the level of the input signal passively from -∞ to unity (0 dB). IN and OUT jacks - A single input connected to the top attenuator will pass to all 3 outputs when all the attenuators are open. Additional inputs in the lower attenuators will break the chain so that input 1 (top) will only feed output 1, input 2 will only feed output 2 and input 3 will only feed output 3. Installation The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty. Zhongshan Eurotec Electronics Limited No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China