Behringer B-2 PRO Manual - Page 2

2 DUAL DIAPHRAGM CONDENSER MICROPHONE B-2 PRO User Manual Important Safety Instructions Take care not to drop your microphone as this can lead to severe damage. BEHRINGER assumes no liability for any damage caused by the user. Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre- installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. When the microphone is not in use, please take it out from its elastic suspension, clean it with a soft cloth, and then place it in its case. Place the bag containing moisture-absorbing crystals close to the microphone head. Never dismount the screen holding the capsule, as this can damage the microphone! Never try to modify the printed circuit board inside your B-2 PRO! This can lead to microphone damage that cannot be repaired. Any such attempt will void the warranty. Limited Warranty This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Please register your new BEHRINGER equipment right after your purchase by visiting behringer.com and read the terms and conditions of our warranty carefully. Condenser microphones are extremely moisture-sensitive. Never use your microphone in close proximity to water (e.g. bath-tubs, wash-basins, sinks, washing machines, pools, etc.). When doing voice recordings, always use the enclosed popscreen to safely protect the capsule from moisture. Always use the power supply specified in the operating instructions.