Behringer B105D Quick Start Guide - Page 6
B105D Controls
View all Behringer B105D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
10 B105D B105D Controls (6) (1) (7) (2) (8) (9) (10) (3) (11) (12) (4) (5) (13) (15) (14) (16) (17) (19) (18) (21) (22) (20) Quick Start Guide 11 (EN) Step 1: Controls (1) HIGH EQ knob adjusts the level of (13) LINE INPUT jack connects to (20) STANDBY ENABLE/DISABLE treble frequencies. external audio sources using cables switch turns the auto-standby (2) MID EQ knob adjusts the level of with 1/8" (3.5 mm) stereo connectors. midrange frequencies. (14) LINE 2 combo jack accepts audio (3) LOW EQ knob adjusts the level of bass frequencies. signals over cables using XLR, balanced ¼" TRS or unbalanced ¼" TS connectors. (4) LEVEL 2 knob adjusts the input level for the LINE INPUT and LINE 2 jacks. (15) MIC/GUITAR latching switch toggles the MIC/LINE 1 input power-saving function on (ENABLE) or off (DISABLE). When the auto-standby function is enabled, the unit will power down if no input signal is detected for 30 minutes. To exit the powered down state, turn the POWER switch off and then back on. (5) LEVEL 1 knob adjusts the input level for the MIC/LINE 1 input. (6) MAIN LEVEL knob adjusts the final, main output volume. between settings optimized for balanced signals from microphones (MIC) or unbalanced signals from instruments (GUITAR), such as guitars or basses. (21) POWER switch turns the unit on and off. (22) POWER SOURCE jack accepts the included IEC cable. (7) POWER LED lights up to indicate the unit has been powered on. (16) MIC/LINE 1 combo jack accepts balanced microphone signals via (8) USB input accepts USB connection cables with XLR connectors or from memory devices with unbalanced instrument signals MP3 files. (from guitars or basses) via cables (9) BLUETOOTH button activates the Bluetooth circuit and makes the unit available for Bluetooth pairing and audio playback from with ¼" TS connectors. Use the MIC/GUITAR button to optimize this input for microphones or instrument signals. Bluetooth-equipped devices. (17) MAIN IN combo jack accepts audio When the Bluetooth circuit is first signals over cables using XLR, activated, the button's indicator balanced ¼" TRS, balanced ¼" TRS LED will blink; When the Bluetooth or unbalanced ¼" TS connectors. successfully pairs with a Bluetooth The MAIN IN input level is controlled device, the LED will stop blinking by the LINE 1 knob. and remain lit. (18) THRU jack can be used to send your (10) BACK () button lets you skip to the previous track (short press) or final mix out over a cable with XLR connectors to a mixer, amplifier or scroll backward through the current an additional active speaker. track (long press) playing back via USB or Bluetooth. (19) MIC/LINE LEVEL latching switch optimizes the THRU output for (11) PLAY/PAUSE () button begins or stops playback of tracks via balanced signals (MIC, switch in) or unbalanced signals USB or Bluetooth. (LINE, switch out). (12) FfoOrRwWarAdRtoDt(he n) bexuttttoranclke(tsshyoorut skip press) or scroll forward through the current track (long press) playing back via USB or Bluetooth.