Behringer DS2800 Quick Start Guide - Page 7
DS2800 Controls
View all Behringer DS2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
12 DS2800 DS2800 Controls (1) (2) (3) (6) (7) (8) (9) (4) (5) (10) 13 Quick Start Guide (EN) Step 2: Controls (1) MODE indicator LEDs light up to (8) LINK A/B outputs send out exact show the unit is powered on (ON) copies of the INPUT A/B signals and to indicate whether the unit over balanced cables with XLR is in 2-in/4-out mode (2-4) or connectors. The LINK output 1-in/8-out mode (1-8). levels are not adjustable. (2) OUTPUT CHANNEL METER LEDs (9) MODE switch toggles between show the output level for each 2-in/4-out mode (2-4, in the channel. The CLIP LED should inward, latched position) and only light occasionally. If the 1-in/8-out mode (1-8, in the CLIP LED lights continuously, outward, un-latched position). rotate the channel's LEVEL knob counter-clockwise to reduce the output level. (10) INPUT A/B jacks accept audio signals from devices that use balanced audio cables with XLR (3) LEVEL knobs control the output connectors. When the DS2800 level for each output channel. is in 1-in/8-out mode (1-8), (4) POWER button turns the unit on when the button is pressed inward and latched in the ON position. To turn the unit off, press the button inward to unlatch and then release the button to the outward OFF position. only the INPUT A XLR jack is active. When in 2-in/4-out mode (2-4), INPUT A and INPUT B are both active, and each INPUT jack feeds signal to four output jacks (OUTPUT jacks 1-4 for INPUT A, and OUTPUT jacks 5-8 for INPUT B). (5) RACK EARS allow you to mount and fix the unit into a standard 1U rack space. (6) POWER jack connects the unit to AC power by using the included IEC cable. (7) OUTPUT jacks send out copies of the input signals received from the INPUT A/B jacks. Each OUTPUT jack uses balanced cables with XLR connectors and has a dedicated LEVEL control on the front panel.