Behringer EUROCOM AX6240 Specifications Sheet - Page 4

AX6240/AX6220 Energy-Efficient, DSP-Powered and Ethernet/USB-Controlled 2900/2000-Watt Low-Impedance amplifier Architect's and Engineer's Specifications Summary description: The amplifier shall be of Class H design with an energy-efficient switch-mode power supply and shall provide two low-impedance output channels in a 2U rack-mountable fan-cooled chassis with integrated DSP and remote Ethernet/USB control. Digital signal processing (DSP) incorporated into the amplifier shall include delay, crossover, dynamics, parametric EQ (8-band), and dynamic EQ (2-band). The amplifier's A/D and D/A converters shall be 24-bit/96 kHz. Controls and indicators shall include the following: • Master Encoder knob for setting volume and DSP parameters • Indicator ring for power (yellow) and clipping (flashing red) • LCD screen to display current DSP module and settings • Up and Down buttons to select DSP modules and parameters • Process button to select DSP processing modules • Setup button to select DSP parameters • Exit button to display the top-level DSP menu • AC power switch on rear-panel to turn amplifier on/off Connections to the amplifier shall include the following: • Remote power on/off on 2-pin Euroblock socket • Inputs A and B, balanced or unbalanced mic or line-level, on XLR/TRS combination jacks and on 3-pin Euroblock sockets • Outputs on NL4 panel connectors (twist-lock) and on binding posts (bare wire or banana plugs) • Ethernet on RJ45 jack for LAN connection • USB jack for connecting a computer • AC power on IEC connector Cooling and protection shall include back-to-front ventilation provided by dual variable-speed fans. Each amplifier output channel shall be protected against overload by a limiter. Each amplifier output channel shall incorporate independent DC and thermal overload protection. 4