Behringer EUROCOM CL3596 Specifications Sheet - Page 3

CL3596/CL3596-WH High-Power 300-Watt, 3-Way, 8 Ω Loudspeaker System with 15" Low-Frequency, 6" Mid-Frequency and 1.35" High-Frequency Transducers Architect's and Engineer's Specifications Summary description: The loudspeaker shall be a professional 3-way fixed-installation loudspeaker system in a steel-braced plywood enclosure using a bypassable internal crossover network with a 15" / 380 mm low-frequency cone transducer and waveguide-mounted 6" / 150 mm mid-frequency cone driver and 1.35" / 34 mm high-frequency compression driver. Drivers: The loudspeaker system shall use three transducers: • Low-frequency driver shall be a 15" / 380 mm direct-radiating cone transducer • Mid-frequency driver shall be a 6" / 150 mm cone driver mounted in tandem with the high-frequency driver on a rotatable 90º x 60º waveguide constructed of polypropylene • High-frequency driver shall be a 1.35" / 34 mm diaphragm compression driver mounted in tandem with the mid-frequency driver on a rotatable 90º x 60º waveguide constructed of polypropylene Enclosure: The loudspeaker system shall be housed in an enclosure constructed of laminated birch plywood that is internally braced with steel. The enclosure shall be finished with durable, scuff-free black or white paint. The front of the enclosure shall be protected with a perforated grille of powder-coated structural steel behind fabric-wrapped acoustically transparent foam. The back of the enclosure shall have a recessed steel input plate for connectors. Rigging and mounting: The exterior of the enclosure shall be fitted with 23 M10 threaded rigging points. The rear of the enclosure shall have 4 M8 threaded inserts for OmniMount™ 60 bolts. The enclosure shall provide attachment points for an optional yoke bracket. I/O and connectors: The loudspeaker system shall have the following connectors: • Two NL4 connectors, wired in parallel as full-range inputs to the passive crossover • One 4-position terminal strip with captive wire clamps and removable plastic cover, with IN terminals wired in parallel to OUT terminals and to the NL4 connectors • Crossover bypass as a detachable connector on the crossover PCB, allowing direct connection to each driver Performance criteria: The loudspeaker system shall meet the following performance criteria: • Nominal impedance shall be 8 Ω • Sensitivity (1 W / 1 m passive) shall be 97 dB • Usable frequency range (-10 dB) shall be 33 Hz - 20 kHz • Frequency response (±3 dB) shall be 37 Hz - 18 kHz • Power Handling (IEC268-5, passive) shall be 300 W RMS @ 40 V • Nominal dispersion shall be 90º x 60º (axis dependent on horn orientation) • Maximum SPL (1 m, passive) shall be 122 dB continuous and 128 dB peak Dimensions and weight: The loudspeaker system shall have the following physical characteristics: • Height shall be 35.0" / 890 mm • Width shall be 18.5" / 470 mm • Depth shall be 16.5" / 418 mm • Net Weight shall be no more than 75.7 lbs / 34.4 kg Model: The loudspeaker shall be the BEHRINGER EUROCOM CL3596/CL3596-WH. 3