Behringer EUROCOM SL4210 Specifications Sheet - Page 3

Architect's and Engineer's Specifications

Page 3 highlights

SL4210/SL4210-WH Ultra-Compact, Surface-Mounted 10-Watt Loudspeaker Architect's and Engineer's Specifications The loudspeaker shall be a professional full-range loudspeaker system in a ported composite enclosure designed for surface-mounting. Driver for the loudspeaker system shall be a single 3.5" x 1.18" rectangular driver. Enclosure for the loudspeaker system shall be constructed of low-resonance molded composite. The enclosure shall be finished with durable, scuff-free black or white paint. The front of the enclosure shall be protected with a detachable wrap-around steel wire-mesh grille with foam backing. The back of the enclosure shall have a recessed receptacle in which the connector shall be located. Mounting bracket shall be supplied with the loudspeaker system. The bracket shall allow aiming in both axes (180 degrees pan, 90 degrees tilt). The bracket shall mount to an included wall plate. Electronics The loudspeaker system shall also include a transformer accessable via a 5 position euroblock connector that sets the loudspeaker to operate at one of the supported wattages for high-impedance operation. Transformer taps at 70 V shall be 10, 5, 2.5 and 1.25 W. Transformer taps at 100 V shall be 10, 5, and 2.5 W. Connection to the loudspeaker system shall be via a 5-pin Euroblock connector on the input plate. Performance criteria met by the loudspeaker system shall include: • Sensitivity (1 W/1 m, half-space) of 80 dB • Usable frequency range (-10 dB) of 120 Hz - 20 kHz • Frequency response (-3 dB) of 150 Hz - 18 kHz • Power Handling (pink noise) of 10 W RMS • Maximum SPL (1 m) of 90 dB continuous and 96 dB peak Physical characteristics of the loudspeaker system shall be: • Height x Width x Depth of 6 x 3.8 x 3.9" / 152 x 97 x 101.5 mm • Net weight of not more than 1.45 lbs / 0.66 kg The loudspeaker system shall be the BEHRINGER EUROCOM SL4210. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

3
Ultra-Compact, Surface-Mounted 10-Watt Loudspeaker
SL4210/SL4210-WH
The loudspeaker shall be a professional full-range loudspeaker system in a ported composite enclosure designed for
surface-mounting.
Driver
for the loudspeaker system shall be a single 3.5" x 1.18" rectangular driver.
Enclosure
for the loudspeaker system shall be constructed of low-resonance molded composite. The enclosure shall
be finished with durable, scuff-free black or white paint. The front of the enclosure shall be protected with a detachable
wrap-around steel wire-mesh grille with foam backing. The back of the enclosure shall have a recessed receptacle in which
the connector shall be located.
Mounting
bracket shall be supplied with the loudspeaker system. The bracket shall allow aiming in both axes
(180 degrees pan, 90 degrees tilt). The bracket shall mount to an included wall plate.
Electronics
The loudspeaker system shall also include a transformer accessable via a 5 position euroblock connector that
sets the loudspeaker to operate at one of the supported wattages for high-impedance operation. Transformer taps at 70 V
shall be 10, 5, 2.5 and 1.25 W. Transformer taps at 100 V shall be 10, 5, and 2.5 W.
Connection
to the loudspeaker system shall be via a 5-pin Euroblock connector on the input plate.
Performance criteria
met by the loudspeaker system shall include:
Sensitivity (1 W/1 m, half-space) of 80 dB
Usable frequency range (-10 dB) of 120 Hz - 20 kHz
Frequency response (-3 dB) of 150 Hz - 18 kHz
Power Handling (pink noise) of 10 W RMS
Maximum SPL (1 m) of 90 dB continuous and 96 dB peak
Physical characteristics
of the loudspeaker system shall be:
Height x Width x Depth of 6 x 3.8 x 3.9" / 152 x 97 x 101.5 mm
Net weight of not more than 1.45 lbs / 0.66 kg
The loudspeaker system shall be the BEHRINGER EUROCOM SL4210.
Architect’s and Engineer’s Specifications