Behringer EUROCOM SL4210 Quick Start Guide - Page 12
EUROCOM SL4240/SL4230/SL4220/SL4210 Installation
View all Behringer EUROCOM SL4210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
22 EUROCOM SL4240/SL4240-WH/SL4230/SL4230-WH/SL4220/SL4220-WH/SL4210/SL4210-WH EUROCOM SL4240/SL4230/SL4220/SL4210 Installation (EN) Step 3: Installation Installing the Mounting Bracket and Base Plate Locate a secure mounting surface for the base plate. Please ensure the mounting surface has sufficient structural strength and integrity to support the weight of the speaker. Run the mounting screws through the base plate screw holes and into the mounting surface until they are tight and secure. Using a hex wrench, thread the mounting bolt into the bolt hole, but do not yet completely tighten down the mounting bolt. Place the SL speaker into the mounting bracket. Align the speaker's top and bottom mounting points with the matching holes on the top and bottom of the mounting bracket. Place the mounting bolt and washers into the bolt hole in the center of the base plate. Run the included mounting screws into the speaker's mounting points and tighten with a screwdriver, but do not yet completely tighten down the screws. Rotate the speaker inside the mounting bracket so that the front of the speaker faces into the bracket. 23 Quick Start Guide Bring the speaker and mounting bracket to the base plate. Place the mounting bracket so that the base plate mounting bolt fits through the mounting bracket's bolt key. Move the mounting bracket so that the base plate mounting bolt slides into the mounting brackets bolt channel. Adjust the bracket and speaker against the base plate until you find the desired angle. Tighten the mounting bolt down all the way until the mounting bolt grips and securely holds the bracket's bolt channel. Swivel the speaker into the desired position. Tighten down the mounting screws on the top and bottom of the bracket until the speaker sits firmly in the desired position within the bracket. by contacting the authorized Reseller or Distributor in your region. Clarify all local requirements and obtain necessary approvals and permits before commencing work. When selecting a location for the loudspeaker to be installed ensure that all mechanical, acoustic and safety considerations are observed. Ensure that the structure is capable of supporting the load and that all hardware is rated accordingly with ample safety factor. Do not suspend loudspeaker over areas of public circulation or where failure of the suspension system can cause bodily or property damage. Inspect suspension hardware regularly to ensure integrity. LOUDSPEAKER MOUNTING INSTRUCTIONS - FOR QUALIFIED PERSONNEL ONLY This loudspeaker system may be permanently installed by qualified personnel, using approved methods and materials. Improper installation can pose serious risk of injury or death. Please read these instructions in their entirety before attempting installation. Permanent installation may only be attempted by persons licensed and qualified by appropriate authorities governing the installation location. Installers are to employ only original parts, brackets, fasteners and suspension accessories or properly rated and certified components from third parties. Replace any missing parts Loudspeakers radiate a magnetic field, even when they are not in use. This magnetic field may cause interference with other devices such as computers, magnetic media and certain types of video monitors. Maintain a spacing of 2 meters between the loudspeaker and any such devices to prevent interference. MUSIC Group, its affiliates and representatives shall not be liable for any property damage or personal injury arising from the improper installation, use or maintenance of this product.