Behringer EURODESK SX3242FX Brochure - Page 6
In Place or PFL - 32
View all Behringer EURODESK SX3242FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
EURODESK SX3242FX SIXTEEN MONO channels, each with balanced XLR in with XENYX mic preamp and phantom power for condenser mics ¼" TRS balanced/ unbalanced input Insert I/O for signal processing on individual channels (prefader, pre-EQ and pre-aux send) LOW CUT filter (mono channels) eliminates unwanted infrasonics Semi-parametric MID EQ is sweepable from 100Hz to 8Khz AUX 1 & 2 level controls with PRE/post switch FX1 and FX2 inject built-in FX into the channel or can be used to control an FX effects unit MUTE switch (with bright LED) also mutes aux buses set to post-fader SOLO routes the subgroup signal to the solo bus (Solo In Place) or PFL bus (Pre Fader Listen) Silky-smooth 60mm faders on all channels and buses Page 6 of 8 The Stereo FX RETURN inputs return effect signals from external effects processors EIGHT LINE IN- ONLY CHANNELS. Left and right 25 27 29 31 balanced/ unbalanced line level ¼" TRS inputs (stereo 26 28 30 32 channels 25-26, 27-28, 29-30 and 31-32 TRIM control adjusts input gain via Level Set LED 12 kHz shelving HIGH EQ 80Hz shelving LOW EQ PAN control sets position of the channel signal in the stereo mix Channel CLIP LED Routing switches for assigning channel to MAIN or Subgroups