Behringer EURODESK SX4882 Brochure - Page 4

Page 4 of 9 EURODESK SX4882 Octo-riffic Subgroups Having eight Subgroups give you so much flexibility you may just become a gymnast on the side. These Subgroups can be used to send eight individual tracks directly to your tape, digital interface or hard disk recorder, or they can be used as four stereo submixes. There are two parallel outputs on each subgroup, to feed up to 16 multi-track channels. During a live show you could use four of the subgroups for instrument and vocal sub-mixing to the PA and the other four could be for a tape submix, if you choose not to use Mix B as your tape mix. For use with a stereo PA you still have 4 subgroups total to work with, and when used as a stage monitor console, the SX4882 can provide up to 16 independent monitor mixes by combining the subgroups, Aux busses, and L/R Mix B. Wicked! In the studio, the eight Subgroups allow maximization of recording inputs by allowing several channels to be mixed down to a smaller number of recording tracks. By combining channel inputs into subgroups which go directly out to tape, you have the ability to record even more than 24 discreet inputs. Also, the outputs of the subgroups have selectable operating output levels (+4 dB or -10 dB) to match the inputs of your recording device. Continued on next page DCX2496 Low L Low R EP2000 Live Performance Setup Bass Guitar EUROLIVE F1220A Floor Monitor DSP2024P Keyboard Drums BDI 21 ADI 21 V-AMP3 V-AMP3 Acoustic Guitar Electric Guitar Electric Guitar Synth Module XM8500 Mics B2520 PRO Low L EP4000 Low R B1800X PRO MAIN L OUT MAIN R OUT SUB 7-8 button SUB 5-6 button pressed, PAN pressed, PAN channel channel center, GROUP 5 & 8 center, GROUP 7 & 8 SUB 3-4 button pressed, PAN channel right, GROUP 4 SUB 3-4 button pressed, PAN channel left, GROUP 3 SUB 1-2 SUB 1-2 button button pressed, pressed, PAN PAN channel channel right, left, GROUP 2 GROUP 1 Tape/CD recorder MDX4600