Behringer EUROPOWER EP2000 Manual - Page 12

12 EUROPOWER EP4000/EP2000 User Manual Distortion EP4000 EP2000 < 0.02% < 0.01% Frequency Response at 10 dB below rated output power 20 Hz - 20 kHz, +0/-1 dB at -3 dB points 5 Hz - 50 kHz Cooling EP4000/EP2000 Amplifier Protection EP4000/EP2000 Continuously variable speed fan, back-to-front air flow Full short circuit, open circuit, thermal and HF protection Stable into reactive or mismatched loads Damping Factor EP4000/EP2000 > 300 @ 8 Ω Load Protection EP4000/EP2000 Turn-on/off muting, AC coupling Noise unweighted, 20 Hz to 20 kHz Voltage Gain EP4000 EP2000 Input Sensitivity V RMS (@ 8 Ω) Input Impedance EP4000/EP2000 Controls Front Rear Indicators POWER CLIP SIGNAL Connectors Inputs Outputs -100 dB 50x (34 dB) 40x (32 dB) EP2000 1.15 V (+3.4 dBu) EP4000 1.23 V (+4.0 dBu) 10 k Ω unbalanced, 20 k Ω balanced Output Circuit Type EP4000 EP2000 Power Supply Mains Voltage/Breaker 100 - 120 V~, 50/60 Hz 220 - 230 V~, 50/60 Hz Power Consumption EP4000 EP2000 Mains connector Class H complementary linear output Class AB complementary linear output 15 A 8 A 2600 W 1600 W Standard IEC receptacle Power switch, gain control (channels 1 and 2) DIP switches (10x) green LED red LED, 1 per channel yellow LED, 1 per channel Balanced XLR and ¼" TRS connectors Touch-Proof binding posts and professional speaker connectors Dimensions/Weight Dimensions (H x W x D) EP4000/EP2000 Weight EP4000 EP2000 approx. 3.5 x 19 x 15.8" approx. 88 x 483 x 402 mm approx. 36.6 lbs / 16.6 kg approx. 34.6 lbs / 15.7 kg BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in this manual.