Behringer EUROPOWER EPX2000 Quick Start Guide - Page 18

EUROPOWER EPX2000/EPX3000 Specifications

Page 18 highlights

EUROPOWER EPX2000/EPX3000 • pg 18 EUROPOWER EPX2000/EPX3000 Specifications MODEL: Input Voltage EPX2000 230V EPX3000 230V Stereo Mode (both channels driven) 8Ω / 20 Hz - 20 kHz @ 0.1% THD 8Ω / 1kHz @ 0.1% THD 4Ω / 20 Hz - 20 kHz @ 0.1% THD 4Ω / 1 kHz @ 0.1% THD 2Ω / 20 Hz - 20 kHz @ 1% THD 2Ω / 1 kHz @ 1% THD EPX2000 350W 360W 600W 650W 950W 1000W EPX3000 500W 520W 850W 900W 1400W 1500W Bridged Mono EPX2000 EPX3000 8Ω / 20 Hz - 20 kHz @ 0.1% THD 1200W 1700W 8Ω / 1kHz @ 0.1% THD 1250W 1800W 4Ω / 20 Hz - 20 kHz @ 1% THD 1900W 2800W 4Ω / 1 kHz @ 1% THD 2000W 3000W Distortion 400 @ 8Ω Signal to Noise (20 Hz - 20 kHz) >100 dB >100 dB Voltage Gain 32dB 32dB Input Sensitivity 1V 1V Input Impedance 10k ohms unbalanced / 20k ohms balanced 10k ohms unbalanced / 20k ohms balanced Controls Front Rear Crossover Limiter Type Indicators EPX2000 EPX3000 AC switch/gain controls for each channel AC switch/gain controls for each channel MONO Switch, X-Over Switch, Limiter Switch, BRIDGE MODE Switch MONO Switch, X-Over Switch, Limiter Switch, BRIDGE MODE Switch FX 100Hz, 12dB slope FX 100Hz, 12dB slope VCA CLIP Limiter, VCA CLIP Limiter, switchable switchable Power-on: Blue LED/Per channel > Green Signal LED: -20dB, -10dB/ Yellow LED: 0dB/ Clip: Red LED Power-on: Blue LED/Per channel > Green Signal LED: -20dB, -10dB/ Yellow LED: 0dB/ Clip: Red LED Connectors (each channel) Input Output Cooling Amplifier Protection Load Protection Output Circuitry EPX2000 EPX3000 Active balanced XLR (pin 2+), ¼" TRS RCA connectors Active balanced XLR (pin 2+), ¼" TRS RCA connectors Touch-proof binding posts/ twist-locking professional speaker connectors Touch-proof binding posts/ twist-locking professional speaker connectors Continuously variable speed fan, back-to-front air flow Continuously variable speed fan, back-to-front air flow Full short circuit, Full short circuit, open circuit, open circuit, thermal, ultrasonic, thermal, ultrasonic, RF protection. RF protection. Stable into reactive Stable into reactive or mismatched or mismatched loads loads On/off muting, DC- On/off muting, DC- fault power supply fault power supply shutdown shutdown Class H, 2-tier Class H, 2-tier Power Consumption 1/8 Power (pink noise) Bridged 4ohms Fuse Rating EPX2000 5A_230V / 9A_120V EU:10A250V/ UL:20A250V Size 19"/ 2U EPX3000 7A_230V / 12A_120V EU:15A250V/ UL:30A250V 19"/ 2U www.behringer.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

www.behringer.com
EUROPOWER EPX2000/EPX3000 • pg 18
EUROPOWER EPX2000/EPX3000 Specifications
MODEL:
EPX2000
EPX3000
Input Voltage
230V
230V
Stereo Mode (both channels driven)
EPX2000
EPX3000
8Ω / 20 Hz - 20
kHz @ 0.1% THD
350W
500W
8Ω / 1kHz @ 0.1%
THD
360W
520W
4Ω / 20 Hz - 20
kHz @ 0.1% THD
600W
850W
4Ω / 1 kHz @
0.1% THD
650W
900W
2Ω / 20 Hz - 20
kHz @ 1% THD
950W
1400W
2Ω / 1 kHz @ 1%
THD
1000W
1500W
Bridged Mono
EPX2000
EPX3000
8Ω / 20 Hz - 20
kHz @ 0.1% THD
1200W
1700W
8Ω / 1kHz @ 0.1%
THD
1250W
1800W
4Ω / 20 Hz - 20
kHz @ 1% THD
1900W
2800W
4Ω / 1 kHz @ 1%
THD
2000W
3000W
Distortion
<0.01%
<0.01%
Frequency
Response (at 10db
below rated output
power)
20Hz - 20kHz,
+0/-1 dB
5Hz - 50kHz(at
-3dB points)
20Hz - 20kHz,
+0/-1 dB
5Hz - 50kHz(at
-3dB points)
Damping Factor (1
kHz and below)
>300 @ 8Ω
>400 @ 8Ω
Signal to Noise (20
Hz - 20 kHz)
>100 dB
>100 dB
Voltage Gain
32dB
32dB
Input Sensitivity
1V
1V
Input Impedance
10k ohms
unbalanced / 20k
ohms balanced
10k ohms
unbalanced / 20k
ohms balanced
Controls
EPX2000
EPX3000
Front
AC switch/gain
controls for each
channel
AC switch/gain
controls for each
channel
Rear
MONO Switch,
X-Over Switch,
Limiter Switch,
BRIDGE MODE
Switch
MONO Switch,
X-Over Switch,
Limiter Switch,
BRIDGE MODE
Switch
Crossover
FX 100Hz, 12dB
slope
FX 100Hz, 12dB
slope
Limiter Type
VCA CLIP Limiter,
switchable
VCA CLIP Limiter,
switchable
Indicators
Power-on: Blue
LED/Per channel
> Green Signal
LED: -20dB, -10dB/
Yellow LED: 0dB/
Clip: Red LED
Power-on: Blue
LED/Per channel
> Green Signal
LED: -20dB, -10dB/
Yellow LED: 0dB/
Clip: Red LED
Connectors (each channel)
EPX2000
EPX3000
Input
Active balanced
XLR (pin 2+),
¼" TRS RCA
connectors
Active balanced
XLR (pin 2+),
¼" TRS RCA
connectors
Output
Touch-proof
binding posts/
twist-locking
professional
speaker
connectors
Touch-proof
binding posts/
twist-locking
professional
speaker
connectors
Cooling
Continuously
variable speed
fan, back-to-front
air flow
Continuously
variable speed
fan, back-to-front
air flow
Amplifier Protection
Full short circuit,
open circuit,
thermal, ultrasonic,
RF protection.
Stable into reactive
or mismatched
loads
Full short circuit,
open circuit,
thermal, ultrasonic,
RF protection.
Stable into reactive
or mismatched
loads
Load Protection
On/off
muting, DC-
fault power supply
shutdown
On/off
muting, DC-
fault power supply
shutdown
Output Circuitry
Class H, 2-tier
Class H, 2-tier
Power Consumption
EPX2000
EPX3000
1/8 Power (pink
noise) Bridged
4ohms
5A_230V /
9A_120V
7A_230V /
12A_120V
Fuse Rating
EU:10A250V/
UL:20A250V
EU:15A250V/
UL:30A250V
Size
19"/ 2U
19"/ 2U