Behringer EUROPOWER PMP550M Quick Start Guide - Page 12

22 EUROPOWER PMP550M EUROPOWER PMP550M FX Parameter Chart Preset Name 01 - 06 Reverbs 01 HALL 02 CONCERT 03 ROOM 04 CHAMBER 05 RICH PLATE 06 DIGIVERB 07 - 13 Ambience / Delay 07 AMBIENCE 08 GATED 09 REVERSE 10 DELAY 11 PING PONG 12 ECHO 13 TAPE ECHO 14 - 20 Modulation 14 DETUNE 15 PITCH 16 CHORUS 17 FLANGER 18 PHASER 19 TREMOLO 20 PANNER 21 - 25 Combi FX 21 DELAY & REVERB 22 CHORUS & REVERB 23 PITCH & REVERB 24 CHORUS & DELAY 25 FLANGER & DELAY Param. 1 Decay Time Decay Time Decay Time Decay Time Decay Time Decay Time Room Size Room Size Room Size Feedback Feedback Feedback Feedback Detune Pitch Depth Depth Depth Depth Depth DelayReverb Balance DelayChorus Balance PitchReverb Balance ChorusDelay Balance FlangerDelay Balance Range 2.00 to 10.00 0.30 to 4.00 0.20 to 4.00 0.10 to 1.20 0.20 to 4.00 0.40 to 4.50 Small/Large Small/Large Small/Large 0 to 100 0 to 100 0 to 100 0 to 100 1 to 99 -12 to +12 Sine/Triangle Negative/Positive Stereo/Mono Square/Triangle Square/Triangle -90 to +90 -90 to +90 -12 to +12 -90 to +90 -90 to +90 Param. 2 Room Size Room Size Room Size Room Size Room Size Room Size Tail Gain Type Brightness Delay Time (Tap) Delay Time (Tap) Delay Time (Tap) Delay Time (Tap) Pre Delay Add 25 Cent LFO Speed (Tap) LFO Speed (Tap) LFO Speed (Tap) LFO Speed (Tap) LFO Speed (Tap) Delay Time (Tap) Reverb Decay Reverb Decay Delay Time (Tap) Delay Time (Tap) Range Small/Large Small/Large Small/Large Small/Large Small/Large Back/Front Off/On Alive/Gated Dark/Bright 120 to 838 ms 120 to 800 ms 120 to 800 ms 120 to 800 ms 5 / 50 ms +0 / 25 cents 200 to 4000 ms 200 to 4000 ms 200 to 4000 ms 120 to 1200 ms 120 to 1200 ms 120 to 523 ms Short/Long Short/Long 120 to 800 ms 120 to 800 ms Specifications Microphone Inputs Type Mic E.I.N. (20 Hz - 20 kHz): @ 0 Ω source resistance @ 50 Ω source resistance @ 150 Ω source resistance Gain Max. input level Impedance Phantom power Mono Line Inputs Type Impedance Max. input level Equalizer Low High Main Mix System Data Noise Main mix @ -∞, Channel fader @ -∞ Main Mix @ 0 dB, Channel fader @ -∞ Main Mix @ 0 dB, Channel fader @ 0 dB Frequency response (amplifier output) Amplifier (Per Channel) Max output power Loudspeaker Outputs Type Load impedance DSP Type Converter Sampling rate Wireless System BEHRINGER ULM Series USB Receiver Display Type Power Supply Mains voltage Fuse Power consumption Mains connection Dimensions/Weight Dimensions (H x W x D) Weight *Independent of limiters and driver protection circuits XLR, electronically balanced -122 dB / -125 dB A-weighted -122 dB / -125 dB A-weighted -121 dB / -124 dB A-weighted +29 dB , +9 dB with pad +12 dBu @ +10 dB gain 2.0 kΩ balanced / 1.0 kΩ unbalanced +15 V 1/4" TRS connector Approx. 20 kΩ balanced, 10 kΩ unbalanced +21 dBu 80 Hz / ±15 dB 12 kHz / ±15 dB -106 dB / -110 dB A-weighted -87 dB / -90 dB A-weighted -80 dB / -82 dB A-weighted 20 Hz - 20 kHz (+0/-3 dB) 250 W* + 250 W* 1/4" TS connector 4-8 Ω KLARK TEKNIK 24-bit Sigma-Delta 40 kHz USB socket accepts signals from 2 independent BEHRINGER ULM mics 2-digit, 7-segment LED 100-120 V~ (for UL, JP, CA); 220-240 V~ (for EU, AU, UK, CN) 100-120 V~: T 5 A H 250 V / 220-240 V~: T 3.15 A H 250 V 90 W Standard IEC receptacle 4.6 x 17.7 x 7.3" / 117 x 450 x 185 mm 9.9 lbs / 4.5 kg Quick Start Guide 23