Behringer EUROPOWER PMP560M Brochure - Page 7

Page 7 of 7 EUROPOWER PMP560M Specifications Microphone Inputs Type XLR, electronically balanced Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source impedance -110 dB / 113 dB A-weighted @ 50 Ω source impedance -110 dB / 113 dB A-weighted @ 150 Ω source impedance -110 dB / 113 dB A-weighted Gain +29 dB, +9 dB with pad Max. input level +12 dBu @ 10 dB gain Impedance 2.0 kΩ balanced / 1.0 kΩ unbalanced Phantom power Switchable +48 V Mono Line Inputs Type 1/4" TRS connector, balanced Impedance approx. 20 kΩ Max. input level +21 dBu Stereo Line Inputs Type 1/4" TS connector, unbalanced Impedance approx. 20 kΩ Max. input level +21 dBu Equalizer Low Mid High 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB Main Mix System Data Noise Main mix @ -∞, channel fader @ -∞ Main mix @ 0 dB, channel fader @ -∞ Main mix @ 0 dB, channel fader @ 0 dB Frequency response (amplifier output) Amplifier (Per Channel) Max output power Loudspeaker Outputs Type Load impedance DSP Type Converter Sampling rate Wireless System BEHRINGER ULM Series USB Receiver -90 dB / -94 dB A-weighted -77 dB / -86 dB A-weighted -73 dB / -79 dB A-weighted 20 Hz - 20 kHz (+0/-3 dB) 250 W* + 250 W* 1/4" TS connector 4-8 Ω KLARK TEKNIK 24-bit Sigma-Delta 40 kHz Display Type 2-digit, 7-Segment LED Power Supply Mains voltage 100-120 V~ (for UL, JP, CA); 220-240 V~ (for EU, AU, UK, CN) Fuse 100-120 V~, T 5 A H 250 V; 220-240 V~, T 3.15 A H 250 V Mains connection Standard IEC receptacle Dimentions/Weight Dimensions (H x W x D) 12.0 x 17.7 x 6.3" 305 x 450x160 mm Weight 15 lbs / 6.8 kg *Independent of limiters and driver protection circuits Please note these specifications are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner. USB socket accepts signals from 2 independent BEHRINGER ULM mics For service, support or more information contact the BEHRINGER location nearest you: Europe MUSIC Group Services UK Tel: +44 156 273 2290 Email: [email protected] USA/Canada MUSIC Group Services NV Inc. Tel: +1 702 800 8290 Email: [email protected] Japan MUSIC Group Services JP K.K. Tel.: +81 3 6231 0454 Email: [email protected] Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, and TURBOSOUND are part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only. Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.