Behringer EURORACK PRO RX1202FX Brochure - Page 2

Page 2 of 4 EURORACK PRO RX1202FX Balanced main mix outputs with gold-plated XLR connectors Switchable +48 V phantom power for condenser microphones Long-wearing 60 mm logarithmic-taper faders and sealed rotary controls Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany On the back panel, the LEFT and RIGHT MAIN OUT XLR jacks can be used to feed a recording device or PA system. For live performances, keep pre-recorded music cued up for between-set breaks by connecting a CD player or MP3 player via the stereo CD/TAPE IN jacks. If the band wants a recording of their performance, send signal to a recording device such as a mini-disc recorder via the CD/TAPE OUT jacks. Use the MON AUX SEND to send signal to floor monitors in a live setting, or to a headphone amp in a recording setting. When it's time for playback of recorded material, send signal to studio monitors through the CTRL OUT jack. If a recording session or live performance calls for an effect not programmed in the onboard FX processor, send signal to an outboard effects unit via the FX AUX SEND, then feed the signal back to the RX1202 through the AUX RETURN jacks. Effects, effortlessly The FX/CTRL section puts sophisticated digital effects at your fingertips. Use the PROGRAM dial to scroll through the effect presets, then use the FX TO MAIN dial to govern how much of the effect is heard in the summed signal of the mixer. Push FX SOLO to hear only the effects signal in your monitors or headphones. Continued on page 4 TRIM control adjusts input 12 kHz gain via shelving Level Set LED HIGH EQ Smooth 60 mm faders on all channels 80 Hz shelving LOW EQ FX PROGRAM 3-LED master control level meter selects FX and channel presets clip LED FX TO MAIN sends effects 7-segment to the LED FX main mix preset menu. MON produces a mono mix of individual signals FX determines level of effects applied to a channel CD/TAPE TO MIX assigns CD/tape input to the main mix. CD/TAPE TO CTRL enables monitoring of CD/ TAPE In via PHONES output or monitors BAL determines PHONES/ the position CONTROL of the signal ROOM control in the stereo CTRL OUT image and PHONES outputs FX SOLO 60 mm sends MAIN fader effects through headphones or monitors Balanced XLR MAIN OUT CTRL OUT to studio monitors Stereo channels have balanced ¼" line level inputs Mono inputs are balanced ¼" inputs Channel INSERTs for external signal processors Switchable CD/ CD/ +48 phantom TAPE IN TAPE power for OUT condenser mics To external MON output effects for floor processor in monitor or headphones amplifier From external effects processor Balanced XLR microphone with low-noise, highheadroom IMP preamp