Behringer MPA30BT Quick Start Guide - Page 9

16 EUROPORT MPA100BT/MPA30BT EUROPORT MPA100BT/MPA30BT Getting started (EN) Step 3: Getting started Connect the MPA30BT/MPA100BT to a power outlet by using the included IEC power cable. Turn all LEVEL knobs and the MAIN LEVEL knob down to the full counter-clockwise setting. Connect all analog microphone, instrument, and/or RCA cables to their respective input jacks. If you are using BEHRINGER wireless microphones, plug the wireless dongle into the WIRELESS SYSTEM USB input. The WIRELESS SYSTEM LEDs will light up when the wireless microphones become active. While playing music from your Bluetooth device, turn the BLUETOOTH/MP3 LEVEL knob to about the 50% position. If you have an instrument plugged into an INPUT channel, play the instrument and slowly rotate that channel's LEVEL knob clockwise until you find an acceptable level. Guitar Slowly rotate the MAIN LEVEL knob clockwise until you achieve a comfortable listening level. Quick Start Guide 17 Power up the MPA30BT/MPA100BT by pressing the POWER switch to the "on" position. To pair a Bluetooth device with the MPA40BT/MPA40BT-PRO, follow these steps: • Open Bluetooth in your mobile phone, MP3 player or other Bluetooth equipment to pair and connect. • In your Bluetooth device, enter the PIN code: 0000 (Bluetooth version 2.0 and above will not require a PIN code). • If your Bluetooth device does not receive a connection request, press and hold the Bluetooth button until it flashes quickly, and then re-scan for devices on your mobile phone or mp3 player. While speaking into each microphone, slowly rotate the INPUT LEVEL knob clockwise until you find a clean, clear sound. If a microphone signal sounds distorted, rotate the LEVEL knob slowly counter-clockwise until the sound cleans up. Balance all of the audio channels against each other by adjusting each channel's respective LEVEL knob until you find an acceptable mix. Make final adjustments to the MAIN LEVEL knob.