3
EURORACK PRO RX1202FX Technical Specifications
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
TECHNICAL SPECIFICATIONS AND APPEARANCE ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME OF PRINTING. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS
MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS
ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND
MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2011 MUSIC GROUP IP LTD. TRIDENT CHAMBERS, WICKHAMS CAY,
P.O. BOX 146, ROAD TOWN, TORTOLA, BRITISH VIRGIN ISLANDS
Outputs
Aux Sends (FX)
Type
¼" TRS connector, impedancebalanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level
+22 dBu
Aux Sends (MON)
Type
¼" TRS connector, impedance balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level
+22 dBu
Main Out
Type
XLR connectors, balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level
+28 dBu balanced
+22 dBu unbalanced
CTRL Out
Type
¼" TRS connector, impedance balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level
+22 dBu
CD/TAPE Out
Type
RCA connectors, unbalanced
Impedance
approx. 1 kΩ
Max. output level
+22 dBu
Phones
Type
¼" TRS connector
Max. output level
+19 dBu / 150 Ω (316 mW)
EQ
Low
100 Hz / ±15 dB
High
12 kHz/ ±15 dB
Main Mix System Data
1
Noise
Main mix @ -∞,Channel fader -∞
-98 dB / -101 dB A-weighted
Main mix @ 0 dB,Channel fader -∞
-85 dB / -88 dB A-weighted
Main mix @ 0 dB,
-77 dB / -80 dB A-weighted
Channel fader @ 0 dB
Fade Attenuation
2
(Crosstalk Attenuation)
Main fader closed
90 dB
Channel fader closed
90 dB
Frequency Response
Microphone Input to Main Out
<20 Hz – 105 kHz
+1 dB / -1 dB
<10 Hz – 170 kHz
+3 dB / -3 dB
Effects Section
Converter
24-bit Sigma-Delta
Frequency rate
40 kHz
Presets
100
Power Supply
Power consumption
18 W
Voltage
100 – 240 V~, 50/60 Hz
Fuse
100 – 240 V~: T 1.6 A H 250 V
Mains connection
IEC (power) cable
Dimensions/Weight
Dimensions (H x W x D)
approx. 5 ²³´ x 19x 5 µ³¶·"
approx. 133 x 482 x 150 mm
Weight (net)
approx. 6.4 lbs / 2.9 kg
Measuring conditions:
1:20 Hz – 20 kHz; measured at main output.Channels1 – 8 gain @ unity; EQ flat; all channels on mainmix; channels 1/3/5/7
leftmost, channels 2/4/6/8 rightmost.Reference = +6 dBu.2:1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; mainoutput;
gain @ unity.
1
2
3
