Behringer S32 Quick Start Guide - Page 9

16 DIGITAL SNAKE S32 DIGITAL SNAKE S32 Output Configuration S32 Output Signals Outputs > mixer: 44.1/48 kHz clock sync Analog XLR out 1-16 connected to S32 port A AES50 port A = AES50-A, ch01-ch16 AES/EBU (AES 3) = AES50-A ch13-ch14 ch15-ch16 ADAT OUT (Toslink) = AES50-A ch17-ch24 ch25-ch32 P-16 Ultranet Personal Monitoring with Turbosound iQ control = AES50-A ch33-ch48 17 Quick Start Guide Specifications Processing A/D-D/A conversion (Cirrus Logic A/D CS5368, D/A CS4385) Networked I/O latency (stagebox in > console processing* > stagebox out) Connectors Programmable mic preamps, designed by MIDAS, balanced XLR Line outputs, balanced XLR AES/EBU outputs (AES3 XLR) AES50 ports, SuperMAC networking, NEUTRIK etherCON ULTRANET output, RJ45 (no power supplied) MIDI inputs / outputs ADAT outputs, Toslink USB port for system updates, type B Mic Input Characteristics Preamp design Input impedance XLR, unbal. / bal. Non clip maximum input level, XLR THD + noise, 20 dB gain, 0 dBu out Phantom power, switchable per input Equivalent input noise level, XLR (input shorted) CMRR, XLR, @ 20 dB gain (typical) Input/Output Characteristics Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB Dynamic range, analog mic in to analog out (typical) A/D dynamic range, mic preamp and converter (typical) D/A dynamic range, converter and output Cross talk rejection @ 1 kHz, adjacent channels Output Characteristics Output level, XLR, nom./max. Output impedance, XLR, unbal. / bal. Residual noise level, XLR Digital In/Out AES50 SuperMAC networking @ 48 or 44.1 kHz, 24-bit PCM AES50 SuperMAC cable length, CAT5e shielded** ULTRANET networking @ 48 or 44.1 kHz, 22-bit PCM ULTRANET cable length, CAT5 shielded ADAT output @ 48 or 44.1 kHz, 24-bit PCM Toslink optical, cable length AES/EBU output @ 48 or 44.1 kHz, 24-bit PCM XLR, 110 Ω balanced, cable length Power Switch-mode autorange power supply Power consumption Physical Standard operating temperature range Dimensions Weight 24-bit @ 44.1 / 48 kHz, 114 dB dynamic range 1.1 ms 32 16 2 2 1 1/1 2 1 MIDAS 5 kΩ / 10 kΩ +23 dBu < 0.008% (< 0.006% A-weighted) 48 V -128 dBu > 70 dB 10 Hz - 22 kHz 104 dB 106 dB 106 dB 100 dB +4 dBu / +21 dBu 75 Ω / 75 Ω -83 dBu (-85 dBu, A-weighted) 2 x 48 channels, bidirectional up to 100 m 1 x 16 channels, unidirectional up to 75 m 2 x 8 channels, unidirectional 5 m, typical 2 x 2 channels, unidirectional 5 m, typical 100-240 V (50/60 Hz) 55 W 5°C to 40°C (41°F to 104°F) 483 x 242 x 138 mm (19 x 9.5 x 5.4") 5.6 kg (12.4 lbs) *includes all channel and bus processing, excluding insert effects **KLARK TEKNIK NCAT5E-50M recommended NOTE: Please verify that your specific AES50 connections provide stable operation prior to using the products in a live performance or recording situation. The maximum distance for AES50 CAT5 connections is 100 m / 330 ft. Please consider using shorter connections where possible for gaining safety margin. Combining 2 or more cables with extension connectors can reduce the reliability and maximum distance between AES50 products. Unshielded (UTP) cable may work well for many applications, but entails an additional risk for ESD issues. We guarantee, that all our products will perform as specified with 50 m of KLARK TEKNIK NCAT5E-50M, and we recommend using cable of similar quality, only. KLARK TEKNIK also offers the very cost-effective DN9610 AES50 Repeater or DN9620 AES50 Extender for situations where extremely long cable runs are required.